Black Box Personal Computer KVT315A User Manual

May 2010  
KVT319A  
KVT319A-WIDE  
KVT315A  
KVT317A  
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse  
Combines a keyboard with integrated trackball  
or glidepoint mouse and 15", 17", 19", or 19" wide  
LCD monitor into a drawer.  
KVT319A-WIDE model with 19" wide-screen monitor is now available.  
KVT315A, KVT317A, and KVT319A have a trackball mouse.  
KVT319A-WIDE has a GlidePoint® mouse.  
Order toll-free in the U.S.: Call 877-877-BBOX (outside U.S. call 724-746-5500) •  
FREE technical support 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746 •  
Mailing address: Black Box Corporation, 1000 Park Drive, Lawrence, PA 15055-1018 •  
Customer  
Support  
Information  
 
FCC and IC RFI Statements  
Federal Communications Commission and Industry Canada Radio Frequency Interference  
Statements  
This equipment generates, uses, and can radiate radio-frequency energy, and if not installed and used properly, that is, in strict  
accordance with the manufacturer’s instructions, may cause interference to radio communication. It has been tested and found to  
comply with the limits for a Class A computing device in accordance with the specifications in Subpart B of Part 15 of FCC rules,  
which are designed to provide reasonable protection against such interference when the equipment is operated in a commercial  
environment. Operation of this equipment in a residential area is likely to cause interference, in which case the user at his own  
expense will be required to take whatever measures may be necessary to correct the interference.  
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to  
operate the equipment.  
This digital apparatus does not exceed the Class A limits for radio noise emission from digital apparatus set out in the Radio  
Interference Regulation of Industry Canada.  
Le présent appareil numérique n’émet pas de bruits radioélectriques dépassant les limites applicables aux appareils numériques  
de la classe A prescrites dans le Règlement sur le brouillage radioélectrique publié par Industrie Canada.  
Page 3  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
Instrucciones de Seguridad  
(Normas Oficiales Mexicanas Electrical Safety Statement)  
1. Todas las instrucciones de seguridad y operación deberán ser leídas antes de que el aparato eléctrico sea operado.  
2. Las instrucciones de seguridad y operación deberán ser guardadas para referencia futura.  
3. Todas las advertencias en el aparato eléctrico y en sus instrucciones de operación deben ser respetadas.  
4. Todas las instrucciones de operación y uso deben ser seguidas.  
5. El aparato eléctrico no deberá ser usado cerca del agua—por ejemplo, cerca de la tina de baño, lavabo, sótano mojado o cerca  
de una alberca, etc.  
6. El aparato eléctrico debe ser usado únicamente con carritos o pedestales que sean recomendados por el fabricante.  
7. El aparato eléctrico debe ser montado a la pared o al techo sólo como sea recomendado por el fabricante.  
8. Servicio—El usuario no debe intentar dar servicio al equipo eléctrico más allá a lo descrito en las instrucciones de operación.  
Todo otro servicio deberá ser referido a personal de servicio calificado.  
9. El aparato eléctrico debe ser situado de tal manera que su posición no interfiera su uso. La colocación del aparato eléctrico  
sobre una cama, sofá, alfombra o superficie similar puede bloquea la ventilación, no se debe colocar en libreros o gabinetes  
que impidan el flujo de aire por los orificios de ventilación.  
10. El equipo eléctrico deber ser situado fuera del alcance de fuentes de calor como radiadores, registros de calor, estufas u otros  
aparatos (incluyendo amplificadores) que producen calor.  
11. El aparato eléctrico deberá ser connectado a una fuente de poder sólo del tipo descrito en el instructivo de operación, o como  
se indique en el aparato.  
12. Precaución debe ser tomada de tal manera que la tierra fisica y la polarización del equipo no sea eliminada.  
13. Los cables de la fuente de poder deben ser guiados de tal manera que no sean pisados ni pellizcados por objetos colocados  
sobre o contra ellos, poniendo particular atención a los contactos y receptáculos donde salen del aparato.  
14. El equipo eléctrico debe ser limpiado únicamente de acuerdo a las recomendaciones del fabricante.  
15. En caso de existir, una antena externa deberá ser localizada lejos de las lineas de energia.  
16. El cable de corriente deberá ser desconectado del cuando el equipo no sea usado por un largo periodo de tiempo.  
17. Cuidado debe ser tomado de tal manera que objectos liquidos no sean derramados sobre la cubierta u orificios de ventilación.  
18. Servicio por personal calificado deberá ser provisto cuando:  
A: El cable de poder o el contacto ha sido dañado; u  
B: Objectos han caído o líquido ha sido derramado dentro del aparato; o  
C: El aparato ha sido expuesto a la lluvia; o  
D: El aparato parece no operar normalmente o muestra un cambio en su desempeño; o  
E: El aparato ha sido tirado o su cubierta ha sido dañada.  
724-746-5500 | blackbox.com  
Page 4  
 
Table of Contents  
1. Specifications  
2. Overview  
...................................................................................................................................................................6  
...................................................................................................................................................................8  
2.1  
2.2  
2.3  
Introduction...............................................................................................................................................................8  
What’s Included.........................................................................................................................................................8  
Hardware Description................................................................................................................................................9  
2.3.1  
2.3.2  
KVT315A, KVT317A, KVT319A ..................................................................................................................9  
KVT319A-WIDE ........................................................................................................................................ 10  
3. Installation  
................................................................................................................................................................. 11  
3.1  
3.2  
3.3  
How to Use the Slides with the KVT315A, KVT317A, KVT319A............................................................................. 11  
How to Use the Slides with the KVT319A-WIDE..................................................................................................... 12  
Connect to a Server via USB Interface..................................................................................................................... 15  
4. Operation  
................................................................................................................................................................. 16  
4.1  
4.2  
On-Screen Display Operation................................................................................................................................... 16  
DVI-D Option .......................................................................................................................................................... 17  
5. Troubleshooting ................................................................................................................................................................. 18  
5.1  
5.2  
Calling Black Box ..................................................................................................................................................... 18  
Shipping and Packaging .......................................................................................................................................... 18  
Page 5  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
1. Specifications  
Approvals: ServView KVM Drawer: CE, FCC;  
Power supply: UL®, TUV, CE  
Backlight: (4) cold cathode fluorescent tubes  
Brightness (cd/m2): KVT315A, KVT317A, KVT319A: 250;  
KVT319A-WIDE: 300  
Color: KVT315A, KVT317A: 16.2 million;  
KVT319A, KVT319A-WIDE: 16.7 million  
Contrast Ratio (Typical): KVT315A: 300:1;  
KVT317A: 350:1;  
KVT319A: 500:1  
KVT319A-WIDE: 1000:1  
Display Area: KVT315A: 12" x 9" 930.5 x 22.9 cm);  
KVT317A: 13.3" x 10.6" (33.8 x 26.9 cm);  
KVT319A: 14.8" x 11.9" (37.6 x 30.2 cm);  
KVT319A-WIDE: 16" x 10" (40.8 x 25.5 cm)  
Input Signal: KVT315A, KVT317A, KVT319A: Analog RGB, 0.7 Vp-p;  
KVT319A-WIDE: Analog RGB, 0.7 Vp-p, Digital  
OSD Control: Brightness, contrast, color, clock; H. position, V. position, phase, scaling; auto configuration, input select,  
multi-window; Clear EEPROM, OSD adjust  
Pixel Pitch: KVT315A: 0.0117" (0.297 mm);  
KVT317A: 0.0104" (0.264 mm);  
KVT319A: 0.0116" (0.294 mm);  
KVT319A-WIDE: 0.011" (0.285 mm)  
Resolution: KVT315A: Up to 1024 x 768;  
KVT317A, KVT319A: Up to 1280 x 1024;  
KVT319A-WIDE: Up to 1440 x 900  
NOTE: For optimum video performance, VGA resolution should be set to 1280 x 1024.  
Response Time: KVT315A, KVT317A: 5 ms;  
KVT319A: 15 ms;  
KVT319A-WIDE: 8 ms  
Sync Type: Separate H/V, Composite, SOG  
Viewing Angle (Typical): KVT315A, KVT317A: 140° x 120°;  
KVT319A: 170° x 170°;  
KVT319A-WIDE: 160° x 160°  
Connectors: All models: Video input: (1) HD15 F for VGA, PS/2, and USB:  
KVT319A-WIDE: Also (1) DVI-D F for DVI, (1) Power  
Temperature: Operating: +32 to +122° F (0 to +50° C);  
Storage: -4 to +140° F (-20 to +60° C)  
Humidity (Relative): Operating: 8–95%;  
Storage: Less than or equal to 95%  
Power: 12-VDC adapter, VESA DPMS power management  
724-746-5500 | blackbox.com  
Page 6  
 
Chapter 1: Specifications  
Size: KVT315A, KVT317A: 1.8"H x 17.3"W x 17.3"D (4.6 x 43.9 x 43.9 cm);  
KVT319A: 1.8"H x 17.4"W x 18.9"D (4.6 x 44.2 x 48 cm);  
KVT319A-WIDE: 1.7"H x 23.6"W x 17.4"D (4.4 x 60 x 44.2)  
Weight: KVT315A: 41.8 lb. (19 kg);  
KVT317A: 44 lb. (20 kg);  
KVT319A: 48.4 lb. (22 kg);  
KVT319A-WIDE: 40 lb. (18 kg)  
Page 7  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
2. Overview  
2.1 Introduction  
The ServView KVM Drawer (1U) with Trackball Mouse and 15", 17", or 19", LCD (KVT315A, KVT317A, KVT319A) combines  
a keyboard with integrated trackball mouse and monitor into a drawer. The ServView KVM Drawer (1U) with GlidePoint Mouse  
(KVT319A-WIDE) combines a keyboard with integrated GlidePoint mouse and 19" monitor into a drawer. All models feature  
a flip-up design, adjustable brackets, and a built-in on-screen display (OSD) to adjust display settings. Four models are available:  
a 15" LCD screen (KVT315A), a 17" LCD screen (KVT317A), a 19" LCD screen (KVT319A), and a 19" wide-screen LCD  
(KV319A-WIDE).  
2.2 What’s Included  
The drawer attaches to mounting brackets (included) that adjust from 15.4" to 25.6" (39.1 to 65 cm) (front-to-rear 19" mounts).  
The ServView KVM Drawer also has on-screen menus that support multiple languages. For extra security, the drawer has a front-  
access lock. Plus, it includes a 12-VAC, 5A single-power-source remote power adapter.  
Your package should contain the following items. If anything is missing or damaged, please contact Black Box at 724-746-5500.  
• (1) ServView KVM Drawer (1U) with Trackball Mouse and 15", 17", or 19" LCD or  
(1) ServView KVM Drawer (1U) with GlidePoint Mouse and 19" wide-screen LCD  
• (1) DC power adapter (KVT315A, KVT317A, KVT319A models only)  
• (1) Monitor support bracket (KVT315A, KVT317A, KVT319A models only)  
• (2) Keys for front-access lock (KVT315A, KVT317A, KVT319A models only)  
• (1) DVI-D/ DVI-D, M/M (dual-link pins supported, KVT319A-WIDE model only)  
• (1) US Power cord  
• (2) Mounting brackets  
• (4) 3.2*6mm fasteners for mounting brackets  
• (8) 6*15mm screws with associated washers for mounting KVM Drawer in cabinet  
• (1) 4-in-1 KVM cable with USB Type A female to PS/2 male adapter  
• (1) Quick install guide  
• (1) CD-ROM with user manual  
Place the KVM drawer in a suitable environment, as described below.  
• Position the ServView KVM Drawer on a stable and level surface, or mount it in a suitable cabinet.  
• The location should be well ventilated, out of direct sunlight, and away from sources of excessive dust, dirt, heat, water,  
moisture, and vibration.  
724-746-5500 | blackbox.com  
Page 8  
 
Chapter 2: Overview  
2.3 Hardware Description  
2.3.1 KVT315A, KVT317A, KVT319A  
Figure 2-1 shows the KVM drawer’s components. Table 2-1 describes these components.  
6
4
5
3
7
9
2
8
1
Figure 2-1. The ServView KVM Drawer (KVT315A, KVT317A, KVT319A) assembly.  
Table 2-1. The ServView KVM Drawer’s components.  
Component  
Number  
1
2
3
4
5
6
7
8
9
PS/2® keyboard with integrated trackball mouse  
LCD keyboard tray  
Class A active matrix TFT LCD panel  
Analog to digital signal converter board  
Rear metal case  
Aluminum front cover  
LCD inverter  
Ball bearing telescopic slides with stopper  
Adjustable mounting bracket  
Page 9  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
2.3.2 KVT319A-WIDE  
1
6
2
3
4
5
7
8
9
Figure 2-2. The ServView KVM Drawer (KVT319A-WIDE) assembly.  
Table 2-2. The ServView KVM Drawer’s components.  
Number  
Component  
1
2
3
4
5
6
7
8
9
Carry handle to release the two-point lock  
Two-point lock  
LCD interchangeable module kit  
LCD membrane  
“One man” installation slides  
Micro switch for screen auto power off  
Membrane switch (KVM option)  
Keyboard interchangeable module kit  
Mouse interchangeable module kit  
724-746-5500 | blackbox.com  
Page 10  
 
Chapter 3: Installation  
3. Installation  
3.1 How to Use the Slides with the KVT315A, KVT317A, or KVT319A  
1. Install each rear L-bracket using two fasteners shown in Figure 3-1. Leave the fasteners slightly loose.  
Fasteners  
Rear bracket  
Fasteners  
Rear bracket  
Figure 3-1. Installing the rear L-bracket to the LCD keyboard drawer.  
2. Measure the front and rear mounting depth of the rack.  
3. Align eash rear L-bracket to a suitable length and tighen the fasteners shown in Figure 3-2.  
Rear bracket  
Rear bracket  
Figure 3-2. Aligning the rear L-brackets to a suitable length for the rack.  
4. Install the LCD keyboard drawer into the rack.  
NOTE: Hardware (screws and cage nuts) for attaching the mounting bracket to the rack is not included.  
Page 11  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
Rack  
Rack  
LCD keyboard  
drawer  
Figure 3-3. Installing the LCD keyboard drawer into the rack.  
3.2 How to Use the Slides with the KVT319A-WIDE  
1. Attach the left and right mounting bracket to the rack’s 19" mounting rails.  
2. Adjust the mounting bracket to fit your rack.  
3. Install the (8) M6 screws and cup washers (included), but do not tighten them yet.  
Rear side  
Right bracket  
Left bracket  
Front side  
Figure 3-4. Attach the mounting brackets to the rails.  
724-746-5500 | blackbox.com  
Page 12  
 
Chapter 3: Installation  
4. Pull out the left and right inner slide members.  
\
Inner slide  
member  
Inner slide  
member  
Figure 3-5. Pull out inner slide members.  
5. Pick up the LCD tray.  
6. Insert the LCD tray into the mounting bracket.  
7. Pull and hold the left and right black arrow buttons on the rail.  
8. Return the LCD tray to park position.  
Mounting bracket  
Figure 3-6. Inserting the LCD into the mounting bracket.  
9. Using the included (4) M3.2 screws, attach the rear kit to the LCD tray.  
CAUTION: This step is required. If you don’t complete it, the KVM drawer will be damaged.  
Page 13  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
Front side  
M3.2  
screws  
Rear  
kit  
Figure 3-7. Secure the rear kit to the mounting bracket.  
10. Tighten the (8) M6 screws to complete the installation.  
M6  
screw  
Figure 3-8. Complete the installation.  
724-746-5500 | blackbox.com  
Page 14  
 
Chapter 3: Installation  
3.3 Connect to a Server via USB Interface  
Figure 3-9. Example of connecting a 4-in-1 USB cable to a server via a USB interface.  
Figure 3-10. Example of connecting a 4-in-1 combo KVM cable to a server via a PS/2 interface.  
Page 15  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
4. Operation  
4.1 On-Screen Display Operation  
Figure 4-1. Membrane switches.  
Table 4-1. Switches and their functions.  
Icon  
Switch  
Function  
Power light  
Power light  
Green=On  
Orange=Power saving  
Power LCD  
Power on/off LCD  
OSD menu buttons  
Arrow keys  
Display the OSD menu  
Scroll through menu options and adjust the displayed  
control (to auto adjust, press the Exit button for five  
seconds.  
Exit button  
Exit the OSD screen  
Toggle the analog, digital, and video connection (DVI-D  
and video options only)  
724-746-5500 | blackbox.com  
Page 16  
 
Chapter 3: Installation  
Figure 4-2. OSD configuration page.  
Table 4-2. OSD configuration page menu functions.  
Description  
Icon  
Image: Use to enter setup for brightness, contrast, color temp., red,  
green, and blue.  
Geometry: Use to enter setup for the auto adjust, H position, V posi-  
tion, phase, and clock.  
Video: Use to enter setup for color, tint, sharpness, noise reduction,  
DCDi, and TV.  
Audio: Use to enter setup for volume, bass, treble, balance, AVL, and  
mute.  
Misc: Use to enter setup for language, OSD position, graphic mode,  
OSD time, ratio, reset, and timer.  
4.2 DVI-D Option  
DVI-D  
3-in-1 VGA KB  
mouse console  
port  
Figure 4-3. DVI-D option.  
Page 17  
 
ServView KVM Drawer (1U) with Trackball or GlidePoint Mouse and LCD  
5. Troubleshooting  
5.1 Calling Black Box  
If you determine that your ServView KVM Drawer is malfunctioning, do not attempt to alter or repair the unit. It contains no user-  
serviceable parts. Contact Black Box at 724-746-5500.  
Before you do, make a record of the history of the problem. We will be able to provide more efficient and accurate assistance if  
you have a complete description, including:  
• the nature and duration of the problem.  
• when the problem occurs.  
• the components involved in the problem.  
• any particular application that, when used, appears to create the problem or make it worse.  
5.2 Shipping and Packaging  
If you need to transport or ship your ServView KVM Drawer:  
• Package it carefully. We recommend that you use the original container.  
• If you are shipping the ServView KVM Drawer for repair, make sure you include everything that came in the original package.  
Before you ship, contact Black Box to get a Return Authorization (RA) number.  
724-746-5500 | blackbox.com  
Page 18  
 
Black Box Tech Support: FREE! Live. 24/7.  
Tech support the  
way it should be.  
Great tech support is just 20 seconds away at 724-746-5500 or blackbox.com.  
About Black Box  
Black Box Network Services is your source for more than 118,000 networking and infrastructure products. You’ll find everything  
from cabinets and racks and power and surge protection products to media converters and Ethernet switches all supported by  
free, live 24/7 Tech support available in 20 seconds or less.  
®
© Copyright 2010. All rights reserved. Black Box and the Double Diamond logo are registered trademarks of BB Technologies, Inc.  
Any third-party trademarks appearing in this white paper are acknowledged to be the property of their respective owners.  
724-746-5500 | blackbox.com  
 

Billion Electric Company Router BiPAC 7401VP VGP User Manual
Black Box Switch KV1106A User Manual
Black Decker Greenhouse Kit Ht2000 User Manual
Bose Home Theater System AM324446 User Manual
BOXLIGHT Projection Television 12SF User Manual
Breville Fryer BDF450XL User Manual
Brother Fax Machine FAX 575 User Manual
Campbell Hausfeld Nail Gun NB0030 User Manual
Carrier Air Conditioner 40QA024 060 User Manual
Casio Calculator FX ES User Manual