Black Box Network Hardware RM516 User Manual

AUGUST 2000  
RM516  
RM517  
RM518  
RM519  
RM520  
RM521  
RM522  
RM523  
Single/Dual Rackmount Kits  
Description  
Use these Rackmount Kits (part numbers RM516 through RM523) to mount any of several models of our  
converters and line drivers in 19" racks. They can be used to rackmount either a single unit or two units side by  
side. For help deciding which Kit is right for a particular product, call Technical Support at 724-746-5500.  
The examples shown in this sheet for single- and dual-unit installations feature the RM523 Kit, which includes  
one long and two short brackets, two side rails, and some screws and flatwashers. The same principles will apply  
to all of the Kits.  
Single-Unit Installation  
The components that you’ll use for single-unit installation include one short bracket and one long bracket. To  
attach each bracket to the unit’s case (the short bracket to the left side, the long one to the right side), use two  
of the included screws and flatwashers, as shown below. Insert the screws in the two front holes on the unit’s  
sides. (Nuts are already in place, mounted on the side walls inside the unit.)  
Attaching the RM523 for single-unit installation.  
After you attach the brackets, the unit is ready for mounting. Fasten the brackets to the side rails of your 19" rack  
with four screws, cage nuts, etc. (These aren’t included in the Kit.)  
 

Belkin Network Router F5D7234 4 User Manual
Black Box Computer Accessories BLACK BOX CAT5 5e 6 LAN Performance Verifier User Manual
Black Decker Convection Oven EF2750 User Manual
Braun Blender MR 6550 M FP HC User Manual
Bryant Air Conditioner 123A User Manual
Bushnell Telescope North Star GOTO User Manual
Campbell Hausfeld Air Compressor DG480100CK User Manual
Campbell Manufacturing Oxygen Equipment CS512 User Manual
Casio Cash Register TE 8000F User Manual
Celestron Telescope 52291 User Manual