Black Box Computer Hardware Server Access Module User Manual

KV1720A  
KV1721A  
KV1722A  
To connect the Server Access Module (SAM)  
UTP Cable  
up to 1,000 feet from the  
server to the user  
About the Server Access Module  
The SAM-enhanced UTP cable design eliminates  
complex cabling connections in your switch system.  
A single cable delivers real-time, high bandwidth video  
for KVM switching up to 1,000 feet between the  
server and the user. The SAM's advanced technology  
provides built-in memory and security, enabling you  
to store server names and prohibit unauthorized  
access to the server from the UTP cabling.  
Octopus Appliance  
Server Access Module - Sun  
The SAM draws its power from the server and  
supports Keep Alive functionality, enabling your  
server to operate properly with or without connectivity  
to the Octopus unit. Keep Alive functionality is  
suspended during upgrade.  
Server Access Module - USB  
For additional information  
Server Access Module - PS/2  
For further instructions on hardware connection,  
software setup and security configuration, please  
refer to the installer/user guide included with the  
latest software and firmware updates.  
Server  
Connecting a server to the SAM  
1
HD15 and 13W3  
versions available  
If the server is not already powered down, do so now.  
Plug the SAM connectors into the appropriate ports  
on the back of the server. Next, power up the server.  
When the server has completely powered up,  
proceed to the next step.  
Server  
NOTE: Do not reboot the server during the  
upgrade process.  
Server  
Connecting the SAM to the  
2
Troubleshooting tips  
Octopus unit  
If a server is unavailable through the Octopus system,  
make sure that all Octopus servers and components are  
powered up and all cables are correctly attached. If  
operation is not restored, test your connection with another  
SAM, or with another port on the Octopus system.  
Connect one end of the UTP cable to a server port  
on the Octopus unit and the other end into the  
SAM. If the Octopus unit is not already powered  
up, do so now.  
FREE tech support, 24 hours a day, 7 days a week: Call 724-746-5500 or fax 724-746-0746  
Mailing address: Black Box Corporation, 1000 Park Dr., Lawrence, PA 15055-1018  
World-Wide Web: www.blackbox.com E-mail: [email protected]  
© Copyright 2004. Black Box Corporation. All rights reserved.  
CUSTOMER  
SUPPORT  
INFORMATION  
590-376-001B  

Grundig GUVCD2800 User Manual
Grundig DIGI 100 SERVICE MANUAL CUC 1834 User Manual
GE MONOGRAM ZGU36N6HSS User Manual
Electrolux SIG 224 G User Manual
Electrolux SG 424 User Manual
Eizo FlexScan L568, L568 AS User Manual
DFI ES300 User Manual
Dell 1501FP User Manual
Cypress CY7C1266V18 User Manual
Bloomfield Industries Wells Bloomfield Cooktop WV 2HFGRW User Manual