Clarion DXZ725 User Manual

Owner’s manual

Mode d’emploi

Manual de instrucciones

AM/FM CD PLAYER WITH DVD/CD/MD CHANGER

CONTROL

•

RADIO AM/FM-LECTEUR CD AVEC COMMANDE DE CHANGEUR

DVD/CD/MD

•

RADIO-REPRODUCTOR AM/FM DE DISCOS COMPACTOS CON

CONTROL DE CAMBIADOR DE DVD/DISCOS COMPACTOS/

MINIDISCOS

Clarion Co., Ltd.

Printed in China / Imprimé en Chine / Impreso en China

PE-2466B

2001/12 (C·D)

280-7723-00

Motorized Face

2. PRECAUTIONS

● When the Sirius Satellite

What is Sirius Satellite Radio?

This unit uses motorized face to make large-

screen displays possible.

2. Before the MOTORIZED FACE closes, there

may be a sound from the safety mechanism.

This is normal.

1. When the inside of the car is very cold and the

player is used soon after switching on the

heater moisture may form on the disc or the

optical parts of the player and proper playback

may not be possible. If moisture forms on the

disc, wipe it off with a soft cloth. If moisture

forms on the optical parts of the player, do not

use the player for about one hour.The conden-

sation will disappear naturally allowing normal

operation.

Sirius is radio the way it was meant to be: Up to

100 new channels of digital quality programming

delivered to listeners coast to coast via satellite.

That means 50 channels of completely commer-

cial-free music. Plus up to 50 more channels of

news, sports, and entertainment from names

like CNBC, Discovery, SCI-FI Channel, A&E,

House of Blues, E!, NPR, Speedvision and

ESPN.

2. Driving on extremely bumpy roads which cause

severe vibration may cause the sound to skip.

Radio is connected

When you use the motorized face, be sure to

close it.

∗ For details, refer to the Owner’s Manual

3. If you move the MOTORIZED FACE by hand,

this may create play. To correct this play, with

the power on for the unit, press the [Q] button

to close the MOTORIZED FACE.

3. This unit uses a precision mechanism. Even in

the event that trouble arises, never open the

case, disassemble the unit, or lubricate the ro-

tating parts.

provided with the Sirius Satellite Radio.

CAUTION

BE CAREFUL NOT TO GETYOUR FINGERS

CAUGHT WHEN OPENING AND CLOSING

THE MOTORIZED FACE.

[FNC] button

• Press the button to switch the operation mode

among the SIRIUS mode, etc.

4. After a disc is ejected, the MOTORIZED

FACE automatically returns to the tilted or

closed state. If there is any obstruction when

the MOTORIZED FACE tries to close, the

safety mechanism is triggered and the MO-

TORIZED FACE returns to the open state. If

this happens, remove the obstruction, then

press the [Q] button.

1. For safety’s sake, always close the MOTOR-

IZED FACE before leaving this unit unused

for a prolonged period or switching OFF the

ignition key.

[SC] button

Sirius is live, dynamic entertainment, completely

focused on listeners. Every minute of every day

of every week will be different. All 50 commer-

cial-free music channels are created in-house

and hosted by DJs who know and love the mu-

sic. Do you like Reggae? How about Classic

Rock or New Rock? Sirius has an array of

choices spanning a vast range of musical tastes

including the hits of the 50’s, 60’s, 70’s, & 80’s

as well as Jazz, Country, Blues, Pop, Rap, R&B,

Bluegrass, Alternative, Classical, Heavy Metal,

Dance and many others...

• Performs preset scan while in the SIRIUS

mode. When the button is pressed and held,

auto store is performed.

This equipment has been tested and found to com-

ply with the limits for a Class B digital device, pur-

suant to Part 15 of the FCC Rules.

CAUTION

If you switch OFF the ignition key with the

MOTORIZED FACE tilted, the MOTORIZED

FACE does not close.

[DIRECT] button

• Stores a station into memory or recall it di-

rectly while in the SIRIUS mode.

USE OF CONTROLS, ADJUSTMENTS, OR PER-

FORMANCE OF PROCEDURES OTHER THAN

THOSE SPECIFIED HEREIN, MAY RESULT IN

HAZARDOUS RADIATION EXPOSURE.

5. To avoid scratching the compact disk, keep

the 12 or 8 cm CD level when inserting or re-

moving them.

These limits are designed to provide reasonable

protection against harmful interference in a resi-

dential installation.

[a], [d] button

THE COMPACT DISC PLAYER and MINI DISC

PLAYER SHOULD NOT BE ADJUSTED OR RE-

PAIRED BY ANYONE EXCEPT PROPERLY

QUALIFIED SERVICE PERSONNEL.

This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and

used in accordance with the instructions, may

cause harmful interference to radio communica-

tions. However, there is no guarantee that inter-

ference will not occur in a particular installation.

Handling Compact Discs

• Press the button to selects a station.

CD player or it may damage the CD player.

Use only compact discs bearing the

mark.

[SAT] button

• Press the button to switch the SIRIUS mode.

•

Do not use compact discs that have large

scratches, are misshapen, cracked, etc. Use of

such discs may cause misoperation or damage.

From its state-of-the-art, digital broadcasting fa-

cility in Rockefeller Center, New York City, Sirius

will deliver the broadest, deepest mix of radio

entertainment from coast to coast.

CHANGES OR MODIFICATIONS NOT EX-

PRESSLY APPROVED BY THE MANUFAC-

TURER FOR COMPLIANCE COULD VOID THE

USER’S AUTHORITYTO OPERATETHE EQUIP-

MENT.

Do not play heart-shaped, octagonal, or other

specially shaped compact discs.

If this equipment does cause harmful interference

to radio or television reception, which can be de-

termined by turning the equipment off and on, the

user is encouraged to consult the dealer or an ex-

perienced radio/TV technician for help.

To remove a compact disc from its storage case,

press down on the center of the case and lift the

disc out, holding it carefully by the edges.

Some CDs recorded in CD-R/CD-RW mode may

not be usable.

Sirius will bring you music and entertainment

programming that is simply not available on tra-

ditional radio in any market across the country.

It’s radio like you’ve never heard before.

• Do not use commercially available CD protec-

tion sheets or discs equipped with stabilizers,

etc. These may damage the disc or cause

breakdown of the internal mechanism.

Handling

INFORMATION FOR USERS:.

•

Compared to ordinary music CDs, CD-R and CD-

RW discs are both easily affected by high tem-

perature and humidity and some of CD-R and

CD-RW discs may not be played. Therefore, do

not leave them for a long time in the car.

CHANGES OR MODIFICATIONSTOTHIS PROD-

UCT NOT APPROVED BY THE MANUFAC-

TURERWILL VOIDTHEWARRANTY ANDWILL

VIOLATE FCC APPROVAL.

So Get Sirius and Listen Up! For more informa-

tion, visit siriusradio.com.

Storage

• Do not expose compact discs to direct sunlight

or any heat source.

• New discs may have some roughness around

the edges. If such

• Do not expose compact discs to excess hu-

midity or dust.

MODEL

Ball-point pen

discs are used, the

player may not work

or the sound may

12V

GROUND

• Do not expose compact discs to direct heat

from heaters.

Roughness

AM 530-1710kHz/FM 87.9-107.9 MHz

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.

OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDI-

TIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFER-

ENCE, AND (2) THIS DEVICE MUST ACCEPT ANY INTER-

FERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY

CAUSE UNDESIRED OPERATION.

skip. Use a ball-point

pen or the like to re-

move any roughness

from the edge of the

disc.

Cleaning

• To remove fingermarks and dust, use a soft

cloth and wipe in a straight line from the center

of the compact disc to the circumference.

THIS PRODUCTION COMPLIES WITH DHHS RULES 21 CFR

SUB-CHAPTER J APPLICABLE AT DATE OF MANUFACTURE.

CLARION CO., LTD.

50 KAMITODA, TODA-SHI, SAITAMA-KEN, JAPAN.

• Do not use any solvents, such as commercially

available cleaners, anti-static spray, or thinner

to clean compact discs.

•

Never stick labels on the surface of the compact

disc or mark the surface with a pencil or pen.

051 722 877

MANUFACTURED:

• Never play a compact disc with any cellophane

tape or other glue on it or with peeling off

marks. If you try to play such a compact disc,

you may not be able to get it back out of the

• After using special compact disc cleaner, let

the compact disc dry off well before playing it.

SERIAL No.

PE-

286-

Clarion Co.,Ltd.

MADE IN

Bottom View of Source Unit

Be sure to unfold and read the next page. / Veuillez déplier et vous référer à la page suivante.

Cerciórese de desplegar y de leer la página siguiente.

DXZ7 2 5

Major button operations when external equipment is

connected to this unit

3.CONTROLS / LES COMMANDES / CONTROLES

4. NOMENCLATURE

Note:

[RP] button

●When the CD/MD/DVD changer

is connected

∗ For details, see the section “CD/MD

changer operations”. For the DVD

changer, refer to the Owner’s Manual pro-

vided with the DVD changer.

Source unit / Appareil pilote / Unidad fuente

• Be sure to read this chapter referring to the front diagrams of chapter “3. CONTROLS” on page 5 (unfold).

•

Press the button to turn on or off the AF (Alter-

native Frequency) function in the DAB mode.

(This function is only DAB tuner.)

Names of the Buttons and their Functions

[RELEASE] button

• Press the button to remove the DCP.

[D] button

• Switches the display indication(Main

[

]

[RD] button

ROTARY

•

Use the button to set the PTY (Programme Type)

display,clock display).

[SC] button

[

]

standby mode or PTY items in the DAB mode.

[

]

FNC

[

]

RELEASE

[ROTARY] knob

• Press the front part of the knob to adjust. The

• Performs scan play for 10 seconds for each

track. Disc scan play is performed when the

button is pressed and held.

•

Switches the TV picture mode or VTR (external)

picture mode.

[T] button

knob will pop up.

• Use the button to input a title in the CD mode.

[DIRECT] button

•

[

]

• Adjust the volume by turning the knob clock-

wise or counterclockwise.

• Press and hold the button for 1 second or

longer to enter the adjust mode.

[

]

BND

[RP] button

Stores a station into memory or recall it directly.

•

Performs repeat play. When this button is

[

]

[a], [d] button

• Use the knob to perform various settings.

pressed and held, disc repeat play is performed.

[A] button

• Selects a station.

[RD] button

• Performs random play. Also performs disc ran-

dom play when the button is pressed and held

[

]

• Press and hold the button for 1 second or

[FNC] button

[BND] button

• Switches the band.

[

]

longer to turn the loudness on or off.

• Press the button to turn on the power.

Press and hold the button for 1 second or

longer to turn off the power.

• Use the button to switch to the audio mode

(non fader volume/bass/mid/treble, balance/

fader adjustment)

• When the button is pressed and held,

switches seek tuning or manual mode.

[DIRECT] button

• Designates the disc to be played.

[

]

[

]

DIRECT

[

]

• Switches the operation mode among the ra-

dio mode, etc.

[D] button

●When the DSP is connected

[ ]

[

]

[BEQ] button

• When the button is pressed and held,

switches the disc titles or track titles while in

the MD changer mode.

∗ The factory default setting is “STD” (stan-

• Use the button to select one of the three

types of sound characteristics already stored

in memory.

[Q] button

dard).

[

]

[

]

BEQ

• Use the button to open the motorized face.

This section describes the major buttons to

be operated in the STD mode.

• Ejects a CD when it is loaded into the unit.

• When the button is pressed and held,

switches the user titles or track titles ,etc.while

in the CD changer mode.

[ I ] button

• Recalls ISR radio station in memory.

∗ For details, see the section “DSP Opera-

tions”.

[SC] button

• Performs preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed.

[T] button

• Use the button to input a title in the CD

changer mode.

• Press and hold for 2 seconds or longer:

Stores current station into ISR memory (radio

mode only).

[A] button

• Use the button to select from between G.EQ

or DSF.

With the SLOPING CONSOLE opened / Ouvrez la CONSOLE RABATTABLE

Apertura de la CONSOLA INCLINABLE

• Performs scan play for 10 seconds for each

track while in the CD mode.

•

Use the button to scroll the title during CD-text play

or MD changer play in the CD changer mode.

After G.EQ is selected, press the [D] button

and then the [A] button to turn on or off the

the G.EQ (DSF) effect.

[

] button

[

]

CD IN

• Plays or pauses a CD while in the CD mode.

[

] button

[RP] button

• Plays or pauses a CD, MD or DVD.

• Repeat play while in the CD mode.

After G.EQ is selected, press the [BND] but-

ton and then the [DIRECT] button to select

the G.EQ (DSF) menu.

[a], [d] button

• Selects a station while in the radio mode or

selects a track when listening to a CD. These

buttons are also used to make various set-

tings.

[RD] button

• Performs random play while in the CD mode.

• Selects a track when listening to a disc.

[T] button

[BND] button

• Plays a first track.

•

Use the button to select the “STD” or “PRO” mode.

[DIRECT] button

Press and hold the [T] button for 1 second or

longer to show the adjustment selection dis-

play and then press the [a] button or [d]

button to select “AC-P SEL” in the display.

• Stores a station into memory or recall it di-

rectly while in the radio mode.

[BND] button

• Switches the band, or seek tuning or manual

tuning while in the radio mode.

●When theTV/DAB is connected

∗ For details, see the section “TV opera-

tions” or “DAB operations”.

• Plays a first track while in the CD mode.

Turn [ROTARY] knob clockwise or counter-

clockwise to set the mode to “STD” or “PRO”.

∗ A Digital Radio (DAB) program can be re-

ceived only in Canada.

[CD IN]

• CD insertion slot.

Press [T] button to return to the previous mode.

[SC] button

Note: Be sure to unfold this page and refer to the front diagrams as you read each chapter.

Remarque: Veuillez déplier cette page et vous référer aux schémas quand vous lisez chaque chapitre.

• Performs preset scan while in the radio mode.

When the button is pressed and held, auto

store is performed. (This function is only TV

tuner.)

Nota: Cuando lea los capítulos, despliegue esta página y consulte los diagramas.

DXZ7 2 5

Display Items

Clock (Clock indication) etc.

(Audio mode, FADER, BALANCE,

etc. indications)

Operation status indication

Titles, PS names, PTYs, Clock, etc.

are displays.

Preset channel indication (1 to 6)

Disc number indication (1 to 12)

SIRIUS indication

Stereo indication

Loudness indication

Function mode indication

• The names of modes being selected,

etc. are displayed.

: BEQ indication

(BEQ:Beat EQ)

: Professional mode indication

: DAB indication

• A Digital Radio (DAB) program can be

received only in Canada.

: VSE indication

(VSE:Virtual Space Enhancer)

: Parametric egualizer indication

: Alternative frequency indication

: Traffic announcement indication

: STD mode indication

(STD:Standard)

: DSF indication

(DSF:Digital Sound Field)

: Traffic programme indication

: Programme type indication

: Infomation indication

: Graphic egualizer indication

: Disc indication

: Scan indication

: Repeat indication

: Manual indication

: Random indication

LCD Screen

In extreme cold, the screen movement may slow down and the screen may darken, but this is normal.

The screen will recover when it returns to normal temperature.

DXZ7 2 5

5. REMOTE CONTROL

Receiver for remote control unit

Remote control unit

[

]

FUNC

[

]

[

],[

[

],[

]

BAND

[

]

ISR

[

]

[

]

DISP

MUTE

]

[

]

RDM

SCN

[

]

RPT

Inserting the Batteries

1.Turn the remote control unit over, then slide the

rear cover in the direction of the arrow.

AA (SUM-3, IECR-6/1.5V)

Batteries

2.Insert the AA (SUM-3, IECR-6/1.5V) batteries

that came with the remote control unit facing in

the directions shown in the figure, then close the

rear cover.

Notes:

Using batteries improperly can cause them to

explode. Take note of the following points:

Rear cover

• When replacing batteries, replace both batteries

with new ones.

• Do not short-circuit, disassemble or heat batteries.

• Do not dispose of batteries into fire or flames.

• Dispose of spent batteries properly.

Rear side

DXZ7 2 5

Functions of Remote Control Unit Buttons

Mode

Button

CD/MD changer

DVD changer

Radio (DAB)

Switches among radio, DAB, CD, DVD deck, CD/MD changer, DVD changer, TV, and

AUX.

[FUNC]

Plays the first track.

Top play.

Moves the next disc

in increasing order.

Switches reception

band.

Switches reception

band.

[BAND]

Increases and decreases volume (in all modes).

[

] , [

]

Moves preset

channels up and

down.

Moves tracks up and down.

When pressed and held for 1 second:

Fast-forward/fast-backward.

Moves preset

channels up and

down.

No function.

Switches between playback and pause.

No function.

[

]

Turns mute on and off.

[MUTE]

Recalls ISR radio station in memory.

Press and hold for 2 seconds or longer: Stores current station into ISR memory

[ISR]

(radio mode only).

TA on and off(DAB mode)

Switches among main display, clock display.

[DISP]

[SCN]

Scan play.

Preset scan.

Scan play.

When pressed and

held for 2 seconds:

Auto store.

When pressed and

held for 2 seconds:

Auto store.

When pressed and

held for 1 second:

Disc scan play.

[RPT]

Repeat play.

No function.

AF function on and

off. (DAB mode)

Repeat play.

When pressed and

held for 1 second:

Disc repeat play.

[RDM]

Random play.

Switches between TV

and VTR.

PTY standby mode

on and off.(DAB

mode)

Random play.

When pressed and

held for 1 second:

Disc random play.

∗ Some of the corresponding buttons on the main unit and remote control unit have different functions.

∗ A Digital Radio (DAB) program can be received only in Canada.

DXZ7 2 5

6. DCP

The control panel can be detached to prevent

theft. When detaching the control panel, store it

in the DCP (DETACHABLE CONTROL PANEL)

case to prevent scratches.

Attaching the DCP

1. Insert the DCP so that the A section on the

right side of the DCP catches on the hook B

on the unit.

We recommend taking the DCP with you when

leaving the car.

Removing the DCP

1. With the MOTORIZED FACE closed, turn off

the power.

2. Press the [RELEASE] button to open the

DCP.

[

]

RELEASE button

2. Press the left side C of the DCP carefully to

fit it in place.

3. Pull the DCP toward you and remove it.

CAUTION

• Be sure to follow the procedures described

in the section “Attaching the DCP” when

installing the DCP.

• The DCP can easily be damaged by

shocks. After removing it, be careful not to

drop it or subject it to strong shocks.

DCP

• If the [RELEASE] button is pressed and the

DCP is not locked into place, it may fall out

from vibration of the car.This can break

the DCP, so after removing it, either install

it on the unit or put it in its DCP case.

CAUTION

• Always close the MOTORIZED FACE before

removing the DCP.

• The connector connecting the unit and the

DCP is an extremely important part. Be

careful not to damage it by pressing on it

with fingernails, screwdrivers, etc.

• If you remove the DCP with the MOTOR-

IZED FACE open, the sloping console

closes immediately. Be careful not to get

your fingers caught.

Note:

• If the DCP is dirty, wipe off the dirt with a soft, dry

cloth only.

DXZ7 2 5

7. OPERATIONS

Note:Be sure to read this chapter referring to the front diagrams of

Basic Operations

chapter “3. CONTROLS” on page 5 (unfold).

Adjusting the volume

1. Press the front part of the knob to adjust. The

knob will pop up.

CAUTION

Be sure to lower the volume before switch-

ing off the unit power or the ignition key.The

unit remembers its last volume setting. If you

switch the power off with the volume up,

when you switch the power back on, the sud-

den loud volume may hurt your hearing and

damage the unit.

2. Turning the [ROTARY] knob clockwise in-

creases the volume; turning it counterclock-

wise decreases the volume.

∗ The volume level is from 0 (minimum) to 33

(maximum).

Switching the display

Turning on/off the power

Press the [D] button to select the desired display.

Note:

Each time you press the [D] button, the display

switches in the following order:

•

Be careful about using this unit for a long time with-

out running the engine. If you drain the car’s battery

too far, you may not be able to start the engine and

this can reduce the service life of the battery.

Main display

1. Press the [FNC] button.

2. The illumination and display on the unit light

up. The unit automatically remembers its last

operation mode and will automatically switch

to display that mode.

Clock display

3. Press and hold the [FNC] button for 1 second

or longer to turn off the power for the unit.

Note:

• System check

Main display

The first time this unit is turned on after the wire

connections are completed, it must check what

equipment is connected. When the power is

turned on, “SYSTEM CHCK” and “PUSH

POWER” appear in the display alternately, so

press the [FNC] button. The system check starts

within the unit. When the system check is com-

plete, the power is turned off, so press the [FNC]

button again.

∗ Once selected, the preferred display becomes

the display default. When a function adjust-

ment such as volume is made, the screen will

momentarily switch to that function’s display,

then revert back to the preferred display sev-

eral seconds after the adjustment.

∗ When you have entered a title in a CD/MD, it

appears in the main display. If you have not

entered a title, “D NO-TITLE” or “T NO-

TITLE” appears in the title display instead. For

information on how to enter a title, refer to the

subsection “Entering titles” in section “Op-

erations Common to Each Mode ”.

Selecting a mode

1. Press the [FNC] button to change the opera-

tion mode.

2. Each time you press the [FNC] button, the op-

eration mode changes in the following order:

Radio mode ➜ DAB mode ➜ SIRIUS mode

➜ CD mode ➜ DVD deck mode ➜ CD

changer mode ➜ MD changer mode ➜ DVD

changer mode ➜ TV mode ➜ AUX mode ➜

Radio mode...

∗ External equipment not connected with

CeNET is not displayed.

∗ A Digital Radio (DAB) program can be re-

ceived only in Canada.

∗ The SIRIUS mode can be also switched using

the [SAT] button.

DXZ7 2 5

Basic Operations

Setting the Beat EQ

Adjusting the non fader output

This unit are provided with 5 types of sound tone ef-

fects stored in memory. Select the one you prefer.

volume

You can adjust the volume output from the unit’s

non fader output terminal.

∗ The factory default setting is “USER CUSTOM”.

Each time you press the [BEQ] button, the tone

effect changes in the following order:

1. Press the [A] button and select “NON-FAD

VOL”.

“BASS BOOST” ➜ “IMPACT” ➜ “EXCITE” ➜

“USER CUSTOM” ➜ “TONE BYPASS” ➜

“BASS BOOST” ...

2. Turning the [ROTARY] knob clockwise in-

creases the output volume; turning it counter-

clockwise decreases the output volume.

• BASS BOOST

• IMPACT

: bass emphasized

∗ The factory default setting is “0”. (Setting

range: –6 to 6)

: bass and treble empha-

sized

3. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

• EXCITE

: bass and treble empha-

sized mid de-emphasized

• USER CUSTOM : user custom

• TONE BYPASS : no sound effect

Adjusting the bass

The bass gain, bass F (center frequency) and

bass Q can be adjusted as follows.

Adjusting the tone

Press the [A] button and select the item to ad-

just. Each time you press the [A] button, the

item changes in the following order:

1. Press the [A] button and select “BASS

<GAIN>”.

2. Press the [a] or [d] button and select from

“BASS <GAIN>” ➜ “BASS <F 50>” ➜

“BASS <Q 1>” ➜ “BASS <GAIN>”.

●When “BASS BOOST” is set

“NON-FAD VOL” ➜ “BASS BOOST” ➜

“BALANCE” ➜ “FADER” ➜ Last function

mode.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and adjust the gain,

the F (center frequency) and the Q.

●When “IMPACT” is set

BASS GAIN : –6 to 8 (The factory default

“NON-FADVOL” ➜ “IMPACT” ➜ “BAL-

ANCE” ➜ “FADER” ➜ Last function mode.

setting is “0”)

BASS F :

BASS Q :

50Hz/80Hz/120Hz (The fac-

tory default setting is “50”)

●When “EXCITE” is set

“NON-FADVOL” ➜ “EXCITE” ➜ “BAL-

ANCE” ➜ “FADER” ➜ Last function mode.

1/1.25/1.5/2 (The factory de-

fault setting is “1”)

●When “USER CUSTOM” is set

4. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

“NON-FADVOL” ➜ “BASS <GAIN>” ➜ “MID

<GAIN>” ➜ “TREB<GAIN>” ➜ “BALANCE”

➜ “FADER” ➜ Last function mode.

●When “TONE BYPASS” is set

Adjusting the MID

The MID gain, MID F (center frequency) and

MID Q can be adjusted as follows.

“NON-FADVOL” ➜ “BALANCE” ➜ “FADER”

➜ Last function mode.

∗ Pressing the [BEQ] button for 1 second or longer

while in “USER CUSTOM” sets flat, and displays

a “BEQ FLAT” message.

1. Press the [A] button and select “MID

<GAIN>“.

2. Press the [a] or [d] button and select from

“MID <GAIN>” ➜ “MID <F 1k>” ➜ “MID <Q

2>” ➜ “MID <GAIN>”.

Note:

• When the separately-sold digital sound processor

(DPH910) is used, the bass and treble tone ad-

justments cannot be made. To adjust the tone, re-

fer to the section “DSP Operations”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and adjust the gain,

the F (center frequency) and the Q.

MID GAIN :

–6 to 6 (The factory default

setting is “0”)

DXZ7 2 5

Basic Operations

MID F :

MID Q :

700Hz/1KHz/2KHz (The fac-

tory default setting is “1k”)

Adjusting the Beat EQ

1. Press the [BEQ] button and select the Beat

1.5/2 (The factory default set-

EQ mode (1 to 3) to adjust.

ting is “2”)

2. Press the [A] button and select “BASS

4. When the adfustment is complete, press the

[A] button several times until the function

mode is reached.

BOOST or IMPACT or EXCITE”.

3. Turning the [ROTARY] knob clockwise ad-

justs in the + direction; turning it counter-

clockwise adjusts in the – direction.

∗ When BASS BOOST is selected, you can ad-

Adjusting the TREBLE

The treble gain and treble F (center frequency)

can be adjusted as follows.

just the bass in the range of –3 to 3.

∗ When IMPACT and EXCITE is selected, you

can adjust the bass and treble in the range of

–3 to 3.

1. Press the [A] button and select “TREB

<GAIN>”.

4. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

2. Press the [a] or [d] button and select from

“TREB <GAIN>” ➜ “TREB <F 12K>” ➜

“TREB <GAIN>”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and adjust the gain

and the F (center frequency).

Turning on/off the loudness

The loudness effect emphasizes the bass to

create a natural sound tone. When you are lis-

tening to music at a low volume, it is recom-

mended to use the loudness effect.

TREB GAIN : –6 to 6 (The factory default

setting is “0”)

TREB F :

8KHz/12KHz (The Factory

1. Press and hold the [A] button for 1 second or

longer to turn on the loudness effect. When

the loudness effect is turned on, “LD” lights

in the display.

default setting is “12K”)

4. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

2. Press and hold the [A] button for 1 second or

longer to turn off the loudness effect. “LD”

goes off in the display.

Adjusting the balance

1. Press the [A] button and select “BALANCE”.

Note:

• When using a sold separately digital sound pro-

cessor (DPH910), a feature called auto loudness

is selected. This function is different from the

loudness effect. For further details on the auto

loudness feature, refer to the subsection “Output

adjustment of auto loudness, subwoofer and

playback band” in section “DSP Operations”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the right speaker;

turning it counterclockwise emphasizes the

sound from the left speaker.

∗ The factory default setting is “0”. (Adjustment

range: L13 to R13)

3. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

Adjusting the fader

1. Press the [A] button and select “FADER”.

2. Turning the [ROTARY] knob clockwise em-

phasizes the sound from the front speakers;

turning it counterclockwise emphasizes the

sound from the rear speakers.

∗ The factory default setting is “0”. (Adjustment

range: F12 to R12)

3. When the adjustment is complete, press the

[A] button several times until the function

mode is reached.

DXZ7 2 5

Radio Operations

FM reception

Seek tuning

1. Press the [BND] button and select the de-

sired band (FM or AM).

For enhanced FM performance the

tuner includes signal actuated stereo control,

Enhanced Multi AGC, Impulse noise reduction

curcuits and Multipath noise reduction circuits.

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

Changing the reception area

This unit is initially set to USA frequency intervals

of 10kHz for AM and 200kHz for FM. When using it

outside the USA, the frequency reception range

can be switched to the intervals below.

2. Press the [a] or [d] button to automatically

seek a station.

When the [d] button is pressed, the station is

sought in the direction of higher frequencies; if

the [a] button is pressed, the station is sought

in the direction of lower frequencies.

●Setting the reception area

1. Press the [BND] button and select the de-

sired radio band (FM or AM).

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

2. While pressing the [D] button, each time you

press and hold the number “6” of the [DI-

RECT] buttons for 2 seconds or longer, the

reception area switches from inside the USA

to outside the USA or from outside the USA

to inside the USA.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

∗ Any station preset memories are lost when the

reception area is changed.

1. Press the [BND] button and select the de-

sired band (FM or AM).

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” is lit in the display and manual tuning

is now available.

Listening to the radio

1. Press the [FNC] button and select the radio

mode.The frequency or PS appears in the

display.

2. Tune into a station.

∗ PS: Programme service name

∗ A Digital Radio (DAB) program can be re-

ceived only in Canada.

●Quick tuning:

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

2. Press the [BND] button and select the radio

band. Each time the button is pressed, the ra-

dio reception band changes in the following

order:

●Step tuning:

Press the [a] or [d] button to manually

tune in a station.

FM1 ➜ FM2 ➜ FM3 ➜ AM ➜ FM1...

3. Press the [a] or [d] button to tune in the

Recalling a preset station

desired station.

A total of 24 preset positions (6-FM1, 6-FM2, 6-

FM3, 6-AM) exists to store individual radio sta-

tions in memory. Pressing the corresponding

[DIRECT] button recalls the stored radio fre-

quency automatically.

Tuning

There are 3 types of tuning mode available, seek

tuning, manual tuning and preset tuning.

1. Press the [BND] button and select the de-

sired band (FM or AM).

2. Press the corresponding [DIRECT] button to

recall the stored station.

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store that station

into preset memory.

DXZ7 2 5

Radio Operations

CD Operations

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

Loading a CD

1. Press the [Q] button. The MOTORIZED

FACE opens.

2. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

CAUTION

Be careful not to get your fingers caught

when opening and closing the MOTORIZED

FACE.

Auto store

Auto store is a function for storing up to 6 sta-

tions that are automatically tuned in sequentially.

If 6 receivable stations cannot be received, a

previously stored station remains unoverwritten

at the memory position.

2. Insert a CD into the center of the insertion

slot with the label side facing up. The CD

plays automatically after loading.

Notes:

• Never insert foreign objects into the CD insertion

slot.

• If the CD is not inserted easily, there may be an-

other CD in the mechanism or the unit may re-

quire service.

1. Press the [BND] button and select the de-

sired band (FM or AM).

2. Press and hold the [SC] button for 2 seconds or

longer. The stations with good reception are

stored automatically to the preset channels.

• Discs not bearing the

mark and

∗ If auto store is performed in the FM bands, the

stations are stored in FM3 even if FM1 or FM2

was chosen for storing stations.

CD-ROMs cannot be played by this unit.

Loading 8 cm compact discs

∗ No adapter is required to play an 8 cm CD.

∗ Insert the 8 cm CD into the centre of the inser-

tion slot.

Preset scan

Preset scan receives the stations stored in pre-

set memory in order. This function is useful

when searching for a desired station in memory.

3. After loading a CD, the MOTORIZED FACE

closes automatically.

1. Press the [SC] button.

Notes:

2. When a desired station is tuned in, press the

[SC] button again to continue receiving that

station.

• Note that MOTORIZED FACE closes immediately

after a CD is inserted into CD insertion slot.

• If no CD is loaded in the MOTORIZED FACE, it

closes after 30 seconds.

Note:

• Be careful not to press and hold the [SC] button

for 2 seconds or longer, otherwise the auto store

function is engaged and the unit starts storing

stations.

Listening to a CD already inserted

Press the [FNC] button to select the CD mode.

Play starts automatically. If no CD is loaded in

the unit, “NO DISC” appears in the display.

Instant station recall (ISR)

Instant station recall is a special radio preset

that instantly accesses a favorite radio station at

a touch of a button. The ISR function even oper-

ates with the unit in other modes.

Pausing play

1. Press the [

] button to pause play.

“PAUSE” appears in the display.

●ISR memory

2. To resume CD play, press the [

again.

] button

1. Select the station that you wish to store in ISR

memory.

2. Press and hold the [ I ] button for 2 seconds

or longer.

●Recalling a station with ISR

In any mode, press the [ I ] button to turn on the

radio function and tune the selected radio sta-

tion. “ISR” appears in the display. Press the [ I ]

button again to return to the previous mode.

DXZ7 2 5

CD Operations

Scan play

Ejecting a CD

The scan play locates and plays the first 10 sec-

onds of each track on a disc automatically. This

function continues on the disc until it is cancelled.

1. Press the [Q] button. The MOTORIZED

FACE opens and a CD ejects. “EJECT” ap-

pears in the display.

∗ The scan play is useful when you want to select a

CAUTION

Be careful not to get your fingers caught

when opening and closing the MOTORIZED

FACE.

desired track.

1. Press the [SC] button to start scan play.“SCN”

lights in the display.

2. To cancel the scan play, press the [SC] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

2. Remove the CD and press the [Q] button to

close the MOTORIZED FACE.

Notes:

Repeat play

The repeat play continuously plays the current

track. This function continues automatically until

it is cancelled.

• Be sure to close the MOTORIZED FACE after re-

moving the CD.

• The MOTORIZED FACE closes automatically 30

seconds after removing the CD.

∗ If a CD (12 cm) is left in the ejected position for

15 seconds, the CD is automatically reloaded.

(Auto reload)

1. Press the [RP] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel the repeat play, press the [RP] but-

ton again.“RPT” goes off from the display and

normal play resumes.

∗ 8 cm CDs are not auto reloaded. Be sure to re-

move it when ejected.

Note:

• If you force a CD into before auto reloading, this

can damage the CD.

Random play

The random play selects and plays individual tracks

on a disc in no particular order. This function con-

tinues automatically until it is cancelled.

Selecting a track

●Track-up

1. Press the [RD] button.“RDM” lights in the dis-

play, an individual track is selected randomly

and play begins.

1. Press the [d] button to move ahead to the

beginning of the next track.

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

2. To cancel the random play, press the [RD] but-

ton again. “RDM” goes off and normal play

resumes.

●Track-down

1. Press the [a] button to move back to the

beginning of the current track.

2. Press the [a] button twice to move to the

beginning of the previous track.

Fast-forward/fast-backward

●Fast-forward

Press and hold the [d] button for 1 second or

longer.

●Fast-backward

Press and hold the [a] button for 1 second or

longer.

Top function

The top function resets the CD player to the first

track of the disc. Press the [BND] button to play

the first track (track No. 1) on the disc.

DXZ7 2 5

Operations Common to Each Mode

5. Press and hold the [

] button for 2 sec-

onds or longer to clear the title and cancel

title input mode.

Entering titles

Titles up to 10 characters long can be stored in

memory and displayed for CD, CD changer and

TV stations. The number of titles that can be en-

tered for each mode are as follows.

Turning the external output

Mode

Number of titles

50 titles

adjustment display on/off

When not using the external output, you can

turn off the “NON-FADER” display.

CD mode

TV mode

15 titles

∗ The factory default setting is “ON”.

CD changer mode

DCZ625 connected

CDC1255z connected

Number of titles

100 titles

∗ Even if the level adjustment display is set to

“OFF”, signals can be output from the external

output.

50 titles

1. Press and hold [T] button for 1 second or

longer to switch to the adjustment selection

display.

1. Press the [FNC] button to select the mode

you want to enter a title (CD, CD changer or

TV).

2. Press the [a] or [d] button to select “NON-

2. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

enter the title.

FADER”.

3. Turn the [ROTARY] knob clockwise to set

“ON” or counterclockwise to set “OFF”.

3. Press the [D] button and display the main.

● ON:

4. Press the [T] button. “TTL” appears in the dis-

When you press the [A] button, the “NON-

FADVOL” item is displayed.

play and the cursor position flashes.

5. Press the [a] or [d] button to move the

∗ The output level can be adjusted.

● OFF:

cursor.

6. Press the [D] button to select a character.

Each time you press the [D] button, the char-

acter changes in the following order:

Even when you press [A] button, the “NON-

FADVOL” item is not displayed.

∗ The output level cannot be adjusted.

4. Press [T] button to return to the previous

Capital letters ➜ Numbers ➜ Symbols ➜

Umlaut ➜ Capital letters...

mode.

7. Turn the [ROTARY] knob to select the de-

sired character. Turning the [ROTARY] knob

clockwise moves the cursor to the next char-

acter; turning it counterclockwise moves the

cursor to the previous character.

Hi / Lo dimmer control

You can adjust the reduced illumination level of

the dimmer.

8. Repeat steps 5 to 7 to enter up to 10 charac-

ters for the title.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

9. Press and hold the [

] button for 2 sec-

onds or longer to store the title into memory

and cancel title input mode.

2. Press the [a] or [d] button to select “DIM-

MER”.

3. Turn the [ROTARY] knob clockwise to “ON”

Clearing titles

1. Select and play a CD in the CD changer or

tune in to a TV station for which you want to

clear the title.

or counterclockwise to “OFF”.

4. Press the [T] button to return to the previous

mode.

2. Press the [D] button and display the main.

3. Press the [T] button. “TTL” appears in the dis-

play and the display switches to the title input

display.

4. Press the [BND] button.

DXZ7 2 5

Operations Common to Each Mode

2. Press the [a] or [d] button and select

Setting the method for Ttitle scroll

Set how to scroll in CD-TEXT or MD.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

“AUX SENS”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise as needed and select from

“SENS HIGH”, “SENS MID” or “SENS LOW”.

4. Press the [T] button to return to the previous

mode.

2. Press the [a] or [d] button and select

“AUTO SCROLL”.

3. Turn the [ROTARY] knob clockwise or coun-

Setting the clock

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

terclockwise and select “ON” or “OFF”.

● ON:

To scroll automatically.

● OFF:

2. Press the [a] or [d] button to select

“CLOCK”.

To scroll just 1 time when the title was

changed or the title key was pressed.

3. Press the [

] button.

4. Press the [a] or [d] button to select the

4. Press the [T] button to return the previous

hour or the minute.

mode.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the correct time.

Message display

When the unit is powered on or off, a message

is displayed. The user can turn this message

display ON or OFF.

∗ The clock is displayed in 12-hour format.

6. Press the [

memory.

] button to store the time into

7. Press the [T] button to return to the previous

∗ The factory default setting is “ON”.

mode.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

Note:

• You cannot set the clock when it is displayed with

only the ignition on. If you drain or remove the

car’s battery or take out this unit, the clock is re-

set. While setting the clock, if another button or

operation is selected, the clock set mode is can-

celed.

2. Press the [a] or [d] button to select “MES-

SAGE”.

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the message display ON

or OFF.

Turning the screen saver function

on or off

4. Press the [T] button to return to the previous

mode.

This unit is provided with the screen saver func-

tion which allows you to show various kinds of

patterns and characters in the Operation Status

indication area of the display in a random order.

You can turn on and off this function.

AUX function

This system has an external input jack so you

can listen to sounds and music from external

devices connected to this unit.

If the button operation is performed with the

screen saver function on, the operation display

corresponding to the button operation is shown

for about 30 seconds and the display returns to

the screen saver display.

Selecting AUX IN sensitivity

Make the following settings to select the sensi-

tivity when sounds from external devices con-

nected to this unit are difficult to hear even after

adjusting the volume.

∗ The factory default setting is “ON”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

∗ The factory default setting is “SENS MID”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“AUTO SS”.

DXZ7 2 5

Operations Common to Each Mode

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select “AUTO SS ON” or

“AUTO SS OFF”.

4. Press the [T] button to return to the previous

mode.

∗ The following illustration presents one of the

patterns which are shown when the screen

saver function is turned on.

Triggered audio mute for cellular

telepones

This unit requires special wiring to mute the au-

dio signal automatically when a cellular tele-

phone rings in the car.

∗ This function is not compatible wiht all cellular

telepones Contact your local authorized Clarion

dealer for information on proper installation and

compatibility.

DXZ7 2 5

8. OPERATIONS OF ACCESSORIES

CD/MD Changer Operations

CD/MD changer functions

Switching disc titles and track

When an optional CD/MD changer is connected

through the CeNET cable, this unit controls all

CD/MD changer functions. This unit can control

a total of 2 changers (MD and/or CD).

titles(MD)

This unit can display disc titles and track titles al-

ready entered on MDs.Titles up to 128 characters

long can be displayed by scrolling the titles.

Press the [FNC] button and select the CD(MD)

changer mode to start play. If 2 CD(MD) chang-

ers are connected, press the [FNC] button to se-

lect the CD(MD) changer for play.

∗ Titles cannot be entered for MDs with this unit.

1. Press the [D] button to display the title. The

disc title or track title is displayed.

2. Each time you press and hold the [D] button

for 1 second or longer, the display toggles

between the disc title and the track title.

∗

If “NO MAGAZINE” appears in the display, insert

the magazine into the CD changer. “DISC CHECK”

appears in the display while the player loads

(checks) the magazine.

∗ If “NO DISC” appears in the display, eject the

magazine and insert discs into each slot. Then,

reinsert the magazine back into the CD changer.

● Scrolling titles

When a title is longer than 11 characters, you

can scroll through it with the following operation.

∗ If “NO DISC” appears in the display, load MDs

into the MD changer.

1. Display the MD title (disc or track).

2. Press the [T] button.

CAUTION

The display scrolls through the title.

CD-ROM discs cannot be played in the CD

changer.

Selecting a CD

Each [DIRECT] button corresponds to a disc

loaded into the magazine.

Pausing play

1. Press the [

●Selecting a disc from 1 to 6

] button to pause play.

“PAUSE” appears in the display.

Press the corresponding [DIRECT] button (1 to

6) to select the desired disc.

2. To resume play, press the [

] button again.

●Selecting a disc from 7 to 12 (only when a

12 disc CD changer is used.)

Displaying CD titles

This unit can display title data for CD-text CDs

and user titles input with this unit.

Press and hold the [DIRECT] button (1 to 6) for

1 second or longer to select the desired disc.

∗ If a CD is not loaded in a slot of magazine, press-

ing the [DIRECT] button corresponding to its disc

number is invalid.

1. Press the [D] button to display the title.

2. Each time you press and hold the [D] button

for 1 second or longer, the title display

changes in the following order:

Selecting an MD

User title (disc) ➜ CD-text title (disc) ➜ Artist

name ➜ CD-text title (track) ➜ user title

(disc)...

Each [DIRECT] button corresponds to an MD

loaded into the MD changer. Press the corre-

sponding [DIRECT] button (1 to 6) to select the

desired disc.

Note:

• If the CD playing is not a CD-text CD or no user

title has been input, “NO-TITLE” appears in the

display.

∗ If an MD is not loaded in a slot of MD changer,

pressing the [DIRECT] button corresponding to its

disc number is invalid.

● Scrolling a CD-text title

When a CD-text title is longer than 11 charac-

ters, you can scroll the display as follows.

1. Display the CD-text title (disc or track).

2. Press the [T] button. The title scrolls.

DXZ7 2 5

CD/MD Changer Operations

Scan play

Scan play locates and plays the first 10 seconds

of each track on a disc automatically. This func-

tion continues on the disc until it is cancelled.

Selecting a track

●Track-up

1. Press the [d] button to move ahead to the

beginning of the next track.

∗ The scan play is useful when you want to select a

2. Each time you press the [d] button, the

track advances ahead to the beginning of the

next track.

desired track.

1. Press the [SC] button to start track scanning.

“SCN” lights in the display.

●Track-down

2. To cancel the scan play, press the [SC] but-

ton again. “SCN” goes off from the display

and the current track continues to play.

1. Press the [a] button to move back to the

beginning of the current track.

2. Press the [a] button twice to move to the

beginning of the previous track.

Disc scan play

Disc scan play locates and plays the first 10

seconds of the first track on each disc in the cur-

rently selected CD (MD) changer. This function

continues automatically until it is cancelled.

Fast-forward/fast-backward

●Fast-forward

Press and hold the [d] button for 1 second or

longer.

∗ Disc scan play is useful when you want to select a

desired CD (MD).

●Fast-backward

1. Press and hold the [SC] button for 1 second

or longer. “DISC” and “SCN” light in the dis-

play and disc scan play starts.

Press and hold the [a] button for 1 second or

longer.

2. To cancel disc scan play, press the [SC] but-

ton again. “DISC” and “SCN” go off from the

display and the current track continues to

play.

Top function(CD)

The top function plays from the first track (track

No. 1) of the disc.

●When playing a disc 1 to 6

Press the [DIRECT] button (1 to 6) with the

same number as the CD playing.

Repeat play

Repeat play continuously plays the current track.

This function continues automatically until it is

cancelled.

●When playing a disc 7 to 12 (only when a

12 disc CD changer is used.)

Press and hold for 1 second or longer the [DI-

RECT] button (1 to 6) with the same number as

the CD playing.

1. Press the [RP] button. “RPT” lights in the dis-

play and the current track is repeated.

2. To cancel repeat play, press the [RP] button

again. “RPT” goes off from the display and

normal play resumes.

∗ If a CD is not loaded in a slot of magazine, press-

ing the [DIRECT] button corresponding to its disc

number is invalid.

Disc repeat play

Top function(MD)

After all the tracks on the current disc have been

played, disc repeat play automatically replays

the current disc over from the first track. This

function continues automatically until it is can-

celled.

The top function plays from the first track (track

No. 1) of the disc. Press the [DIRECT] button (1

to 6) with the same number as the MD playing.

∗ If an MD is not loaded in a slot of MD changer,

pressing the [DIRECT] button corresponding to its

disc number is invalid.

1. Press and hold the [RP] button for 1 second

or longer. “DISC” and “RPT” light in the dis-

play and disc repeat play starts.

2. To cancel disc repeat play, press and hold

the [RP] button again. “DISC” and “RPT” go

off from the display and normal play resumes

on the current track.

DXZ7 2 5

TV Operations

CD/MD Changer Operations

Random play

Random play selects and plays individual tracks

on the disc in no particular order. This function

continues automatically until it is cancelled.

TV tuner functions

When an optional TV tuner is connected through

the CeNET cable, this unit controls all TV tuner

functions. To watch TV requires a TV tuner and

monitor.

1. Press the [RD] button. “RDM” lights in the

display and random play begins.

2. To cancel random play, press the [RD] button

again. “RDM” goes off from the display and

normal play resumes.

Watching a TV

1. Press the [FNC] button and select the TV

mode.

2. Press the [BND] button to select the desired

TV band (TV1 or TV2). Each time the button

is pressed, the input selection toggles be-

tween TV1 and TV2.

Disc random play

The disc random play selects and plays indi-

vidual tracks or discs automatically in no par-

ticular order. This function continues automati-

cally until it is cancelled.

3. Press the [a] or [d] button to tune in the

desired TV station.

1. Press and hold the [RD] button for 1 second

or longer. “DISC” and “RDM” light in the dis-

play and disc random play starts.

Watching a video

The TV tuner has a VTR input terminal to which

1 external device can be connected. Connect a

12 V video cassette player (VCP) or video cas-

sette recorder (VCR) to the TV tuner input termi-

nal.

2. To cancel disc random play, press and hold

the [RD] button again. “DISC” and “RDM” go

off from the display and normal play resumes

from the current track.

1. Press the [RD] button to select VTR.

2. To return to the TV broadcast, press the [RD]

button.

Tuning

There are 3 types of tuning mode available,

Seek tuning, manual tuning and preset tuning.

Seek tuning

1. Press the [BND] button and select the de-

sired TV band (TV1 or TV2).

∗ If “MANU” is lit in the display, press and hold

the [BND] button for 1 second or longer.

“MANU” in the display goes off and seek tun-

ing is now available.

2. Press the [a] or [d] button to automatically

seek a station.

Press the [d] button to automatically tune

up the frequency band to the next available

TV station; press the [a] button to automati-

cally tune down.

DXZ7 2 5

TV Operations

1. Press the [BND] button and select the de-

Manual tuning

There are 2 ways available: Quick tuning and

step tuning.

sired TV band (TV1 or TV2).

2. Press and hold the [SC] button for 2 seconds

or longer. The stations with good reception

are stored automatically to the preset chan-

nels.

When you are in the step tuning mode, the fre-

quency changes one step at a time. In the quick

tuning mode, you can quickly tune the desired

frequency.

1. Press the [BND] button and select the de-

Preset scan

sired band (TV1 or TV2).

Preset scan allows the user to view each preset

position before it automatically advances to the

next preset. This function is useful for searching

for a desired TV station in memory.

∗ If “MANU” is not lit in the display, press and

hold the [BND] button for 1 second or longer.

“MANU” lights in the display and manual tun-

ing is now available.

1. Press the [SC] button.

2. Tune into a station.

2. When the desired station is found, press the

[SC] button again to remain tuned to that sta-

tion.

●Quick tuning:

Press and hold the [a] or [d] button for 1

second or longer to tune in a station.

Note:

●Step tuning:

• Do not press and hold the [SC] button for 2 sec-

onds or longer. Doing so will trigger the auto store

function and start storing stations into memory.

Press the [a] or [d] button to manually

tune in a station.

Setting the TV diver

You can change the reception setting for the TV

antenna connected to the TV tuner.

Recalling a preset station

A total of 12 TV stations can be stored (6-TV1

and 6-TV2). This allows you to select your favor-

ite TV stations and store them in memory for

later recall.

1. Press and hold the [T] button for 1 second or longer

to switch to the adjustment selection display.

2. Press the [a] or [d] button to select “TV

1. Press the [BND] button and select the de-

DIVER”.

sired TV band (TV1 or TV2).

3. Turn the [ROTARY] knob clockwise to set to

2. To recall a stored TV station, press the de-

“ON” or counterclockwise to set to “OFF”.

sired [DIRECT] button to select that station.

● ON:

∗ Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the current

station into preset memory.

Sets reception emphasizing the visual.

● OFF:

Sets the diver setting to OFF.

Manual memory

1. Select the desired station with seek tuning,

manual tuning or preset tuning.

4. Press the [T] button to return to the previous

mode.

2. Press and hold one of [DIRECT] buttons for

2 seconds or longer to store the current sta-

tion into preset memory.

Auto store

Auto store selects 6 TV stations automatically

and stores each one into preset memory.

If there are not 6 stations with good reception,

stations previously stored in memory remain

and only the strong stations are stored into

memory.

DXZ7 2 5

DSP Operations

DSP control function

6. Pressing the [

] button returns to the ad-

justment selection display.

If the DSP (DPH910), sold separately, is con-

nected to this unit using the CeNET cable, all

the functions of the DSP can be controlled.

7. Press the [T] button to return to the previous

mode.

DSF functions

Selecting the easy mode or the

professional mode

∗ The factory default setting is “STD”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

There are 2 modes available in DPH910, STD

mode and professional mode. Choose one of

them and adjust the sound field and the sound

quality.

∗ STD mode: Standard mode

●Functions common to each mode:

Auto loudness, etc.

2. Press the [a] or [d] button to select “AC-P

SEL”.

●Standard mode:

3. Turn the [ROTARY] knob clockwise or coun-

terclockwise to set the mode to “STD” or

“PRO”.

Adjustment using the graphic equalizer function

and the DSF function.

4. Press the [T] button to return to the previous

●Professional mode:

mode.

Adjustment using the VSE function and the

parametric equalizer function.

∗ When the STD mode is selected, adjustment for

the professional mode cannot be made. On the

contrary, when the professional mode is selected,

adjustment for the STD mode cannot be made.

Entering titles

You can give a title to the user memory of the

DSF, G.EQ, VSE and P.EQ that you have ad-

justed yourself.

∗ For details on functions of each mode, refer to

the owner’s manual supplied with the DPH910.

1. Press the [A] button to select the adjustment

mode in which you want to give a title.

∗ Hereafter the graphic equalizer is referred to as a

G.EQ, the space equalizer referred to as VSE and

the parametric equalizer referred to as P.EQ.

2. Press the [BND] button to select “USR”.

“USR” will be displayed in the function mode

indication.

3. Press one of the [DIRECT] buttons to select

the user memory to which you want to give a

title.

Operations common to each mode

Output adjustment of auto

loudness, subwoofer and playback

band

4. Press the [T] button.

5. Press the [a] or [d] button to move the

cursor.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

6. Press the [D] button to select the character

fonts.

There are capital letters, small letters, num-

bers, symbols and umlaut available for the

character.

2. Press the [a] or [d] button to select

“SOUND”.

3. Press the [

] button.

7. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the character you want

to input.

4. Press the [a] or [d] button to select the

adjustment item.

There are “A-LD LEVEL”, “WOOFER OUT”,

“WOOFER LPF”, “HPF” and “TEST TONE”

available for the adjustment items.

8. Repeat steps 5 to 7 to input the title.

9. Press and hold the [

] button for 2 sec-

onds or longer to put the title into memory.

The title input mode is cancelled.

∗ For details on each adjustment item, refer to

the owner’s manual supplied with the

DPH910.

5. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

DXZ7 2 5

DSP Operations

4. Turn the [ROTARY] knob clockwise or

STD mode/G.EQ operations

counterclockwise to make the adjustment.

The adjustment range is from –6 to 6.

Note:

• The adjustment made in standard mode is not re-

flected in the adjustment in professional mode.

On the contrary, the adjustment made in profes-

sional mode is not reflected in the adjustment in

easy mode.

5. Repeat steps 3 to 4 to complete the adjust-

ment and press the [T] button.

6. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the edited

contents.

∗ You can give a title to the user memory. For

the inputting method of titles, refer to the sub-

section “Entering titles” in section “Opera-

tions common to each mode”.

G.EQ effect ON/OFF

While the “G.EQ” indication is lit in the display,

the G.EQ effect is set to “ON”.

∗ The factory default setting is “ON”.

1. Press the [A] button and select “G.EQ”.

While “G.EQ” is selected, “G.EQ” blinks in

the display.

STD mode/DSF operations

DSF effect ON/OFF

When the “DSF” indication is lit in the display,

the DSP effect is set to “ON”.

2. Press the [D] button. “G.EQ” in the display lit

or unlit.

∗ When “G.EQ” is unlit, the G.EQ effect is set to

OFF.

∗ The factory default setting is “ON”.

1. Press the [A] button and select “DSF”.

Note:

• If the G.EQ effect is set to OFF, the adjustment

made in “G.EQ operations” is not reflected in the

music source.

2. Press the [D] button. “DSF” in the display lit

or unlit.

∗ When “DSF” is unlit, the DSF effect is set to

OFF.

Selecting a G.EQ menu

1. Press the [A] button and select “G.EQ”.

Note:

• If the DSF effect is set to OFF, the adjustment

made in “DSF operations” is not reflected in the

music source.

2. Press the [BND] button to select “BASC” (ba-

sic). “BASC” is displayed in the function

mode indication.

Setting the listening position menu

1. Press the [A] button and select “DSF”.

3. Press one of the [DIRECT] buttons and se-

lect the desired G.EQ menu.

2. Press the [a] or [d] button to set the lis-

∗ To select the user memory, press the [BND]

button to select “USR” and press one of the

[DIRECT] buttons.

tening position type.

There are FULL SEAT, FRONT-R, FRONT-L,

FRONT (only front seats), REAR (only rear

seats) and PASS available for the listening

position types.

Editing/storing a G.EQ menu (User

memory)

1. Select a G.EQ menu which you want to edit

on the basis of.

∗ The factory default setting is “FULL SEAT”.

Making fine adjustment of the

listening position

1. Upon completion of setting the listening posi-

2. Press and hold the [T] button for 1 second or

longer.

3. Press the [a] or [d] button to select the

frequency to be adjusted.

tion, press the [

] button.

There are 50Hz, 100Hz, 200Hz, 400Hz,

1kHz, 3kHz and 12kHz available for the ad-

justment frequency.

2. Press the [a] or [d] button to select “BAL-

ANCE” or “FADER”. The selected item blinks.

3. Turn the [ROTARY] knob clockwise or

counterclockwise to adjust the balance and

the fader.

∗ For details on each adjustment item, refer to

the owner’s manual supplied with the

DPH910.

4. Press the [

mode.

] button to return to the DSF

DXZ7 2 5

DSP Operations

Selecting a sound field menu

1. Press the [A] button and select “DSF”. “DSF”

blinks in the display.

VSE effect ON/OFF

While the “VSE” indication is lit in the display,

the VSE effect is set to “ON”.

∗ The factory default setting is “ON”.

1. Press the [A] button and select “VSE”.

2. Press the [BND] button to select “BSC1” (ba-

sic-1) or “BSC2” (basic-2). “BSC1” or “BSC2”

is displayed in the function mode indication in

the display.

2. Press the [D] button. “VSE” in the display lit or

unlit.

3. Press one of the [DIRECT] buttons and se-

∗ When “VSE” is unlit, the VSE effect is set to

OFF.

lect the desired sound field menu.

∗ To select the user memory, press the

[BND] button to select “USR” and press

one of the [DIRECT] buttons.

Note:

• If the VSE effect is set to OFF, the adjustment

made in “VSE operations” is not reflected in the

music source.

Editing/storing a sound field menu

(User memory)

1. Select a sound field menu which you want to

edit on the basis of.

Selecting an VSE menu

1. Press the [A] button and select “VSE”.

2. Press the [BND] button to select “BASC” (ba-

sic). “BASC” is displayed in the function

mode indication in the display.

2. Press and hold the [T] button for 1 second or

longer.

3. Press one of the [DIRECT] buttons and se-

3. Press the [a] or [d] button to select the

lect the desired VSE menu.

item to be adjusted.

∗ To select the user memory, press the [BND]

button to select “USR” and press one of the

[DIRECT] buttons.

There are “EFFECT”, “DELAY”, “REAR MIX”,

“REV.TIME” or “ROOM SIZE” and “HIGH” or

“LIVENESS” available for the items to be ad-

justed.

Editing/storing an VSE menu (User

memory)

1. Select an VSE menu which you want to edit

on the basis of.

∗ For details on each adjustment item, refer to

the owner’s manual supplied with the

DPH910.

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to make the adjustment.

2. Press and hold the [T] button for 1 second or longer.

5. Repeat steps 3 to 4 to complete the adjust-

3. Press the [a] or [d] button to select the

ment and press the [T] button.

item to be adjusted.

6. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the edited

contents.

There are “DIFFUSE”, “CAR WIDTH” and

“CAR LENG” available for the items to be ad-

justed.

∗ You can give a title to the user memory. For

the inputting method of titles, refer to the sub-

section “Entering titles” in section “Opera-

tions common to each mode”.

∗ For details on each adjustment item, refer to

the owner’s manual supplied with the

DPH910.

4. Turn the [ROTARY] knob clockwise or

counterclockwise to make the adjustment.

The adjustment range is from 1 to 10 for

each item.

Professional mode/VSE operations

Note:

5. Repeat steps 3 to 4 to complete the adjust-

• The adjustment made in professional mode is not

reflected in the adjustment in standard mode. On

the contrary, the adjustment made in standard

mode is not reflected in the adjustment in profes-

sional mode.

ment and press the [T] button.

6. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the edited

contents.

∗ You can give a title to the user memory. For

the inputting method of titles, refer to the sub-

section “Entering titles” in section “Opera-

tions common to each mode”.

DXZ7 2 5

DSP Operations

Professional mode/P.EQ operations

P.EQ effect ON/OFF

Digital Radio / DAB Operations

DAB control function

When a CeNET cable is used to connect a DAB

(DAH913 or DAH9500z) (sold separetely), all

functions can be operated.

While the “P.EQ” indication is lit in the display,

the P.EQ effect is set to “ON”.

∗ A Digital Radio (DAB) program can be received

only in Canada.

∗ The factory default setting is “ON”.

1. Press the [A] button and select “P.EQ”.

Listening to the DAB station

1. Press the [FNC] button to select the DAB

mode.

2. Press the [D] button. “P.EQ” in the display is

changed from blinking to lit or unlit.

∗ When “P.EQ” is unlit, the P.EQ effect is set to OFF.

Note:

• If the P.EQ effect is set to OFF, the adjustment

made in “P.EQ operations” is not reflected in the

music source.

2. When the unit receives a DAB station, the

display changes in the following order:

Frequency channel ➜ service label

Selecting a P.EQ menu

1. Press the [A] button and select “P.EQ”.

“P.EQ” blinks in the display.

2. Press the [BND] button to select “BASC” (ba-

sic). “BASC” is displayed in the function

mode indication in the display.

Switching displays

Press the [D] button for 1 second during the

Main (service label) display to select Main (ser-

vice label) or Sub (PTY).

3. Press one of the [DIRECT] buttons and se-

lect the desired P.EQ menu.

Note:

∗ To select the user memory, press the [BND] but-

ton to select “USR” and press one of the [DI-

RECT] buttons.

• The display shown in the normal reception mode

and the preset reception mode is the same when

a DAB station is received.

Editing/storing a P.EQ menu (User

memory)

1. Select a P.EQ menu which you want to edit

on the basis of.

3. When the unit does not receive a DAB sta-

tion, the display changes in the following or-

der:

–Normal reception mode–

2. Press and hold the [T] button for 1 second or longer.

3. Press the [a] or [d] button to select the

item to be adjusted.

–Preset reception mode–

There are correction channel, correction

band, selection of the center frequency, gain

adjustment and selection of the Q-curve

available for the items to be adjusted.

∗ For details on each adjustment item, refer to

the owner’s manual supplied with the DPH910.

4. Turn the [ROTARY] knob clockwise or

counterclockwise to make the adjustment.

Notes:

5. Repeat steps 3 to 4 to complete the adjust-

• The number of programmes and broadcasting

times depend on the DAB stations.

• When the strength of DAB signals is weak, audio

output is muted.

ment and press the [T] button.

6. Press and hold one of the [DIRECT] buttons

for 2 seconds or longer to store the edited

contents.

∗ You can give a title to the user memory. For

the inputting method of titles, refer to the sub-

section “Entering titles” in section “Opera-

tions common to each mode”.

DXZ7 2 5

Digital Radio / DAB Operations

Seek tuning

Manual memory

1. Press the [FNC] button to select the DAB mode.

The main unit has a manual memory function for

DAB programmes. Up to 18 programmes (6

programmes each) can be preset in the preset

buttons.

2. Press and hold the [a] or [d] button for 1

second or longer.

[M1], [M2] and [M3]

1. Press the [FNC] button to select DAB mode.

∗ “SEARCHING” appears in the display.

2. Press the [BND] button to select any one

shown above.

3. “DAB” lights up in the display when the main

3. Press the [a] or [d] button to select a de-

unit receives a DAB station.

sired programme.

* The main unit stops the seek tuning when it

cannot find a DAB station. The display returns

to the previous mode.

4. Press and hold one of the [DIRECT] buttons

(1 to 6) for 2 seconds or longer to store the

programme.

Note:

Manual tuning

• The interrupt programme (PTY or INFO) cannot

be written into a manual memory.

1. Press the [FNC] button to the select the DAB

mode.

2. Press and hold the [BND] button for 1 second

Recalling a preset programme

or longer. “MANU” lights up in the display.

1. Press the [FNC] button to select the DAB mode.

3. Press the [a] or [d] button to select a sta-

2. Press the [BND] button. Each time you press

the [BND] button, the display changes in the

following order:

tion.

∗ If no operation is performed for more than 7

seconds, manual tuning is cancelled and the

display returns to the previous mode.

[M1] ➜ [M2] ➜ [M3] ➜ [M1]...

3. Press one of the [DIRECT] buttons to recall a

preset programme.

Switching programmes

1. Press the [FNC] button to receive a DAB station.

Note:

• Press and hold the [DIRECT] button for 2 sec-

onds or longer to store the programme currently

being received. (Manual memory)

2. Press the [a] or [d] button to switch

programmes in the DAB station.

Note:

• The programme name may be the same depend-

ing on DAB programmes.

AF function

The AF function switches to a different fre-

quency on the same network in order to main-

tain optimum reception.

Programme scan

This function scans through each receivable

programme in a DAB station being received for

10 seconds sequentially. This is useful when you

want to search for a desired programme.

∗ The factory default setting is “ON”

● Switching OFF the AF function

Press the [RP] button. “AF” in the display goes

off and the AF function turns off.

1. Press the [FNC] button to receive a DAB station.

● Switching ON the AF function

2. Perform the following operation depending

on the connected model.

Press the [RP] button. “AF” in the display lights

and the AF function turns on.

Press the [SC] button. “SERVICE SCN” lights

up and the unit starts scanning each

programme for 10 seconds sequentially.

Each time the main unit scans, the

* If the reception of the current broadcast station

deteriorates, “SEARCHING SAME STATION” or

“SEARCH” appears in the display and the radio

searches for the same programme on another fre-

quency.

programme name is shown in the display.

3. To stop programme scan when a desired

programme is tuned in.

Press the [SC] button.

DXZ7 2 5

Digital Radio / DAB Operations

Turn the [ROTARY] knob clockwise or

counterclock wise to set the information item

for ON or OFF.

INFO (Announcement)

In the INFO standby mode, when the selected

announcement programme starts, the main unit

switches to the selected announcement

programme automatically.

5. Press the [T] button to return to the previous

display.

Switching the PTY and INFO display

language

●Setting the INFO standby mode

If you press and hold the [ I ] button for 1 second

or longer, “INFO” lights in the display and the

main unit is set into the INFO standby mode until

the selected announcement is broadcast.When

the selected announcement broadcast starts, the

announcement item appears in the display. If you

press and hold the [ I ] button for 1 second or

longer while the selected announcement broad-

cast is being received, the selected announce-

ment broadcast reception is cancelled and the

main unit goes into the INFO standby mode.

You can select one of 2 languages (English or

French) for the PTY and INFO shown in the dis-

play.

∗ The factory default setting is “ENGLISH”.

1. Press and hold the [T] button for 1 second or

longer to switch to the adjustment selection

display.

2. Press the [a] or [d] button and select

“LANGUAGE”.

3. Press the [

] button.

●Cancelling INFO standby mode

4. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the desired language.

To cancel the INFO standby mode, press and

hold the [ I ] button for 1 second or longer.

5. Press the [T] button to return to the previous

mode.

●Information select

This is a function for selecting INFORMATION

ON or OFF in the Information interrupt mode.

TA (Traffic Announcement)

You can set ON up to 6 information items.

You can select any of the 6 items below:

In the TA standby mode, when a traffic announce-

ment broadcast starts, the traffic announcement

broadcast is received as top priority regardless of

the function mode. Traffic programme (TP) auto-

matic tuning is also possible.

INFORMATION item

ENGLISH

TRAVEL

WARNING

NEWS

Contents

∗ This function can only be used when “TP” is lit in

the display. When “TP” is lit, this means that the

DAB broadcast station being received has traffic

announcement programmes.

Transport flash

Warning / Service

News flash

WEATHER

EVENT

Area weather flash

Event announcement

Special event

● Setting TA standby mode

If you press the [ I ] button when only “TP” is lit

in the display, “TP” and “TA” light in the display

and the unit is set into TA standby mode until a

traffic announcement is broadcast. When a traf-

fic announcement broadcast starts, “TRA INFO”

appears in the display. If you press the [ I ] but-

ton while a traffic announcement broadcast is

being received, the traffic announcement broad-

cast reception is cancelled and the unit goes

into TA standby mode.

SPECIAL

1. Perform the following operation depending

on the connected model.

Press and hold the [T] button for 1 second or longer.

2. Press the [a] or [d] button to select “INFO

SEL”, then press the [

] button to enter

“INFO SEL”mode.

3. Press the [a] or [d] button to select an in-

● CancellingTA standby mode

formation item.You can select any of 6 items:

With “TP” and “TA” lit in the display, press the [ I ]

button. The “TA” in the display goes off and TA

standby mode is cancelled.

TRAVEL ➜ WARNING ➜ NEWS ➜

WEATHER ➜ EVENT ➜ SPECIAL ➜

TRAVEL ...

∗ If “TP” is not lit, pressing [ I ] button searches for a

TP station.

4. Perform the following operation depending

on the connected model.

DXZ7 2 5

Digital Radio / DAB Operations

● Searching for a TP station

PTY item

Contents

News

When “TP” is not lit, if you press the [ I ] button,

“TA” in the display lights and the unit automati-

cally receives a TP station.

ENGLISH

NEWS

INFORM

SPORTS

TALK

Information

Sports

Note:

• If a TP station is not received, the unit continues

the search operation. Pressing the [ I ] button

again goes off “TA” in the display and stops TP

station searching.

Talk

ROCK

Rock

CLS ROCK

ADLT HIT

SOFT RCK

TOP 40

Classic Rock

Adult Hits

Soft Rock

Top 40

Auto store function for TP stations

You can automatically store up to 6 TP stations

into preset memory. If the number of TP that can

be received is less than 6, broadcast stations al-

ready stored in memory are left without being

overwritten.

COUNTRY

OLDIES

SOFT

Country music

Oldies

Soft music

With “TA” lit in the display, press and hold the

[SC] button for 2 seconds or longer. The TP sta-

tions with the good reception sensitivity are

stored into preset memory.

NOSTALGA Nostalgia

JAZZ

Jazz

CLASSICL

R & B

Classical

∗ Even if you select FM1 or FM2, a TP station is

stored into memory for FM3.

Rhythm and Blues

Soft Rhythm and Blues

SOFT R&B

LANGUAGE Language

PTY

REL MUSC

REL TALK

PERSNLTY

PUBLIC

Religious music

This function enables you to listen to the se-

lected programme type, irrespective of the func-

tion mode.

Religious talk

Personality

Public

∗ PTY broadcasts are not yet available in all coun-

tries.

COLLEGE

WEATHER

College

∗ In the INFO standby mode, INFO stations have

priority over PTY stations.

Weather

∗ In the TA standby mode, TP stations have priority

over PTY stations.

● Setting PTY standby mode

When you press the [RD] button, “PTY” lights in

the display and the PTY standby mode is turned

on. When the selected PTY broadcast starts, the

PTY item name appears in the display.

● Cancelling PTY standby mode

When you press and hold the [RD] button for 1

second or longer, “PTY” goes off in the display

and PTY standby mode is cancelled.

● Cancelling a PTY interrupt broadcast

Press the [RD] button during the PTY interrupt

broadcast, the PTY interrupt is cancelled and

the unit returns to PTY standby mode.

Selecting PTY

1. When you press the [RD] button, the unit

goes into PTY select mode.

2. Press any one of the [DIRECT] buttons. Al-

ternatively, turn the [ROTARY] knob clock-

wise or counterclockwise to select the de-

sired PTY.

DXZ7 2 5

Digital Radio / DAB Operations

∗ Below are the factory default settings stored

Volume setting of TA, INFO,

emergency broadcast (ALARM) and

PTY

The volume for TA, INFO, ALARM and PTY in-

terrupts can be set during TA, INFO, ALARM

and PTY interrupt. Perform the following opera-

tion depending on the connected model.

for the [DIRECT] buttons.

PTY item

Preset

number

ENGLISH Contents

NEWS

News

SPORTS

Sports

COUNTRY Country music

∗ The factory default setting is “15”.

TALK

JAZZ

SOFT

Talk

During a TA, INFO, ALARM or PTY interrupt,

turn the [ROTARY] knob clockwise or counter-

clockwise to set the volume to a desired level (0

to 33).

Jazz

Soft music

3. The PTY select mode is cancelled automati-

cally 7 seconds after a PTY is selected.

∗ When the TA, INFO, ALARM or PTY interrupt

ends, the volume returns to the level it had before

the interrupt.

PTY seek

1. When you press the [RD] button, the PTY se-

lect mode is turned on.

2. Select PTY.

3. Press the [a] or [d] button. If you press

the [d] button, the unit seeks a PTY broad-

cast moving up the frequencies; if you press

the [a] button, it seeks moving down the

frequencies.

∗ If no station with the selected PTY broadcast

can be received, the unit returns to PTY select

mode.

PTY preset memory

1. When you press the [RD] button, the PTY se-

lect mode is turned on.

2. Turn the [ROTARY] knob clockwise or coun-

terclockwise to select the desired PTY.

The 29 types of PTY below can be selected.

3. If you press and hold any one of the [DI-

RECT] buttons for 2 seconds or longer, the

selected PTY is stored into that preset chan-

nel memory.

Emergency broadcast

When an emergency broadcast is received, all

the function mode operations are stopped.

“ALARM” appears in the display and the emer-

gency broadcast can be heard.

● Cancelling an emergency broadcast

If you press [RP] button, emergency broadcast

reception is cancelled.

DXZ7 2 5

DVD Operations

Operation

●Play/Still operation

Press the [

] button to select the desired

mode (play, still (pause)).

Each time the button is pressed, the mode

changes cyclically.

●Chapter up/down operation (FF/FB opera-

tion)

Press the [d] button for 1 second or shorter to

increment chapters.

Hold down the [d] button for 1 second or longer

to fast forward.

Press the [a] button for 1 second or shorter to

decrement chapters.

Hold down the [a] button for 1 second or longer

to fast backward.

DXZ7 2 5

9. IN CASE OF DIFFICULTY

Problem

Cause

Measure

Power does not turn

on.

(No sound is pro-

duced.)

Fuse is blown.

Replace with a fuse of the same amperage. If

the fuse blows again, consult your store of pur-

chase.

Incorrect wiring.

Consult your store of purchase.

No sound output

Power antenna lead is shor- 1. Turn the unit off.

ted to ground or excessive

when operating the

2. Remove all wires attached to the power anten-

unit with amplifiers or current is required for

power antenna

attached.

na lead. Check each wire for a possible short

to ground using an ohm meter.

remote-on the amplifiers or

power antenna.

3. Turn the unit back on.

4. Reconnect each amplifier remote wire to the

power antenna lead one by one. If the amplifi-

ers turn off before all wires are attached, use

an external relay to provide remote-on voltage

(excessive current required).

Nothing happens

when buttons are

pressed.

The microprocessor has

Turn off the power, then

Reset button

malfunctioned due to noise, press the [RELEASE]

etc.

button and remove the

DCP.

Press the reset button

with a thin rod.

Display is not accu-

rate.

DCP or main unit connec-

tors are dirty.

Wipe the dirt off with a soft cloth moistened with

cleaning alcohol.

Compact disc cannot Another compact disc is

be loaded. already loaded.

Eject the compact disc before loading the new

one.

Sound skips or is noi- Compact disc is dirty.

Clean the compact disc with a soft cloth.

sy.

Compact disc is heavily

scratched or warped.

Replace with a compact disc with no scratches.

Sound is bad directly Water droplets may form on Let dry for about 1 hour with the power on.

after power is turned the internal lens when the

on.

car is parked in a humid

place.

Poor sound quality

The equalizer levels are too If the equalizer levels are too high, the sound

high.

may distort. Lower the equalizer levels.

DXZ7 2 5

10. ERROR DISPLAYS

If an error occurs, one of the following displays is displayed.

Take the measures described below to eliminate the problem.

Error Display

ERROR 2

Cause

Measure

A CD is caught inside the CD deck and is This is a failure of CD deck’s mechanism

not ejected.

and consult your store of purchase.

ERROR 3

ERROR 6

A CD cannot be played due to scratches,

etc.

Replace with a non-scratched,

non-warped-disc.

A CD is loaded upside-down inside the

CD deck and does not play.

Eject the disc then reload it properly.

ERROR 2

A CD inside the CD changer is not

loaded.

This is a failure of CD changer’s

mechanism and consult your store of

purchase.

ERROR 3

ERROR 6

ERROR H

A CD inside the CD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-

warped disc.

A CD inside the CD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when the temperature in the

MD changer is too high and playback has wait for a while to cool off MD changer.

been stopped automatically.

Lower the surrounding temperature and

ERROR 2

An MD inside the MD changer is not

loaded.

This is a failure of MD changer’s

mechanism and consult your store of

purchase.

ERROR 3

ERROR 6

An MD inside the MD changer cannot be

played due to scratches, etc.

Replace with a non-scratched, non-

warped disc.

An MD inside the MD changer cannot be

played because it is loaded upside-down.

Eject the disc then reload it properly.

Displayed when a non-recorded MD is

loaded in the MD changer.

Load a pre-recorded MD in the MD

changer.

If an error display other than the ones described above appears, press the reset button. If the problem

persists, turn off the power and consult your store of purchase.

DXZ7 2 5

11. SPECIFICATIONS

FM Tuner

Audio

Frequency Range:

Maximum Power Output:

87.9 MHz to 107.9 MHz

200 W (50 W ✕ 4 ch) (JEITA)

Usable Sensitivity:

9 dBf

Continuous Average Power Output:

18 W ✕4, into 4 Ω, 20 Hz to 20 kHz, 1%THD

50dB Quieting Sensitivity:

15 dBf

Bass Control Action (30 Hz):

+15 dB/-12dB

Alternate Channel Selectivity:

70 dB

MID Control Action (1kHz):

±12dB

Stereo Separation (1 kHz):

35 dB

Treble Control Action (10 kHz):

±12 dB

Frequency Response (±3 dB):

30 Hz to 15 kHz

Line Output Level (CD 1 kHz):

4 V/F 2ch + 2 V/R 2ch

4 V/NON-FADER 2ch

AM Tuner

Frequency Range:

General

530 kHz to 1710 kHz

Power Supply Voltage:

14.4 V DC (10.8 to 15.6 V allowable), negative

ground

Usable Sensitivity:

25 µV

Current Consumption:

Less than 15 A

CD Player

System:

Compact disc digital audio system

Speaker Impedance:

4 Ω (4 Ω to 8 Ω allowable)

Weight / Source unit:

3.52 lb. (1.6 kg)

Usable Discs:

Compact disc

Weight / Remote control unit:

1 oz. (30 g) (including battery)

Frequency Response (±1 dB):

5 Hz to 20 kHz

Dimensions / Source unit:

7" (Width) ✕2" (Height) ✕6-1/8" (Depth)

[178 (W) ✕50 (H) ✕155 (D) mm]

Signal to Noise Ratio (1 kHz):

100 dB

Dynamic Range (1 kHz):

95 dB

Dimensions / Remote control unit:

1-3/4" (Width) ✕4-5/16" (Height) ✕1-1/8"

(Depth)

Harmonic Distortion:

0.01%

[44 (W) ✕110 (H) ✕27 (D) mm]

Notes:

• Specifications comply with JEITA Standards.

• Specifications and design are subject to change without notice for further improvement.

106

DXZ7 2 5

11. SPÉCIFICATIONS

Tuner FM

Audio

Plage de fréquence :

87,9 à 107,9 MHz

Puissance de sortie maximale :

200 W (50 W ✕4 canaux) (JEITA)

Sensibilité utilisable :

9 dBf

Puissance de sortie continue moyenne :

18 W ✕4, à 4 W, 20 Hz à 20 kHz, DHT 1%

Seuil de sensibilité à 50dB :

15 dBf

Plage de variation des graves (30 Hz) :

+15 dB/-12dB

Sélectivité de canal de substitution :

70 dB

Action de la commande MID (1 kHz) :

±12 dB

Séparation stéréo (1 kHz) :

35 dB

Plage de variation des aigus (10 kHz) :

±12 dB

Réponse en fréquence (±3 dB) :

30 Hz à 15 kHz

Sortie de ligne (CD 1 kHz) :

4 V/F 2ch + 2 V/R 2ch

4 V/NON-FADER 2ch

Tuner AM

Plage de fréquence :

530 kHz à 1710 kHz

Données générales

Tension d’alimentation :

14,4 V CC (10,8 V à 15,6 V admissible),

masse négative

Sensibilité utilisable :

25 µV

Consommation :

Inférieure à 15 A

Lecteur CD

Système :

Système audionumérique de disque compact

Impédance de haut-parleurs :

4 Ω (4 Ω à 8 Ω admissible)

Poids / Appareil pilote :

3,52 lb. (1,6 kg)

Disques utilisables :

Disques compacts

Poids / Télécommande :

1 oz. (30 g) (avec la pile)

Réponse en fréquence (±1 dB) :

5 Hz à 20 kHz

Dimensions / Appareil pilote :

7" (largeur) ✕2" (hauteur) ✕6-1/8" (profondeur)

[178 (L) ✕50 (H) ✕155 (P) mm]

Rapport signal/bruit (1 kHz) :

100 dB

Plage dynamique (1 kHz) :

95 dB

Dimensions / Télécommande :

1-3/4" (largeur) ✕4-5/16" (hauteur) ✕1-1/8"

(profondeur)

Distorsion harmonique :

0,01%

[44 (L) × 110 (H) × 27 (P) mm]

Remarques :

• Les spécifications respectent les normes JEITA.

• La conception et les spécifications sont sujettes à modification sans préavis pour des raisons d’améliora-

tion.

DXZ7 2 5

107

11. ESPECIFICACIONES

Sintonizador de FM

Audio

Gama de frecuencias:

87,9 a 107,9 MHz

Salida máxima de potencia:

200 W (50 W ✕4 canales) (JEITA)

Sensibilidad útil:

9 dBf

Salida media continua de potencia:

18 W ✕4, con 4 Ω, de 20 Hz a 20 kHz, 1% de

distorsión armónica total

Sensibilidad a 50 dB de silenciamiento:

15 dBf

Acción de control de graves (30 Hz):

+15 dB/-12dB

Selectividad de canal alternativo:

70 dB

Acción de control de MID (1 kHz):

±12 dB

Separación entre canales (1 kHz):

35 dB

Acción de control de agudos (10 kHz):

±12 dB

Respuesta en frecuencia (±3 dB):

30 Hz a 15 kHz

Salida de línea (reproductor de discos compactos 1 kHz):

4 V/F 2ch + 2 V/R 2ch

4 V/NON-FADER 2ch

Sintonizador de AM

Gama de frecuencias:

530 a 1710 kHz

Generales

Tensión de alimentación:

14,4 V CC (permisible de 10,8 a 15,6 V),

negativo a masa

Sensibilidad útil:

25 µV

Consumo de corriente:

Menos de 15 A

Reproductor de discos compactos

Sistema:

Sistema audiodigital de discos compactos

Impedancia de los altavoces:

4 Ω (permisible de 4 a 8 Ω)

Peso / Unidad fuente:

3,52 lb. (1,6 kg)

Discos utilizables:

Discos compactos

Respuesta en frecuencia (±1 dB):

5 Hz a 20 kHz

Peso / Controlador remoto:

1 oz. (30 g) (incluyendo la pila)

Relación señal-ruido (1 kHz):

100 dB

Dimensiones / Unidad fuente:

7" (An) ✕2" (Al) ✕6-1/8" (Prf)

[178 (An) ✕50 (Al) ✕155 (Prf) mm]

Gama dinámica (1 kHz):

95 dB

Dimensiones / Controlador remoto:

1-3/4" (An) ✕4-5/16" (Al) ✕1-1/8" (Prf)

[44 (An) ✕110 (Al) ✕27 (Prf) mm]

Distorsión armónica:

0,01%

Notas:

• Las especificaciones están de acuerdo con las normas de la JEITA.

• Las especificaciones y el diseño están sujetos a cambio sin previo aviso por motivo de mejoras.

108

DXZ7 2 5

Nokia 2280 User Manual
Native Instruments Computer Accessories DDJ T1 User Manual
Motorola i30sx User Manual
LG Electronics UX380 User Manual
Kyocera Sanyo Zio ZioTM M6000 User Manual
HTC NIKI160 User Manual
Centon electronic DataStick Pro RCDSP64GB 001 User Manual
BenQ M300 User Manual
Apple Power Mac G4 Battery User Manual
Addonics Technologies Computer Drive MSCFA2SA User Manual